Hartley & Noble Over-the-Wheel Batt Adaptor Kit with 5 Batts  £124.99

Over-the-Wheel Batt Adaptor Kit with 5 Batts - 300mm

Do you have a pottery wheel with NO batt pin bolts?  Would you like to use throwing batts to create wide based items like plates, bowls and planters? Or even use a Giffin Grip on your wheel? Our 'Over-the-Wheel Batt Adaptor' is designed to help you do all of that!

No need to drill your wheelhead or throw a pad of clay to attach batts to your wheel. Just wet the Batt Rug, lay it flat on the wheel, put the Batt Adaptor on top, and secure your Throwing Batt onto the batt pins.

The Batt Adaptor Kit comes fitted with two pairs of pre-drilled inserts for you to screw the batt pin bolts into. One pair of inserts is positioned at 250mm centres, and the other set is positioned at 254mm centres (these are standard batt pin positions).  This enables you to attach Throwing Batts, Batt Systems or even a Giffin Grip to your wheel. 

KIT 1 

1 x Batt Adaptor made to fit a 300mm diameter pottery wheelhead.
1 x Stay-Put Batt Rug.
1 x Set of Batt Adaptor Bolts (which will screw into the pre-drilled inserts of the Batt Adaptor).
5 x Premium Throwing Batts. 300mm diameter with 10mm batt pin holes drilled only half way through at 254mm centres (made from 9mm thickness MDF).  

The Batt Adaptor is designed to slot onto and around your wheelhead. The external surface diameter of the master batt is 30mm bigger than your wheelhead. (For a wheel that is 300mm diameter, the Batt Adaptor will measure 332mm diameter).