Marx Menders Low Fire Magic Mender  £15.72

MAGIC MENDER LO-FIRE

MARX MAGIC MENDER is the low fire version of MARX AZTEC HIGH FIRE MENDER.

MARX MAGIC MENDER is recommended for ceramics, greenware and bisque.

It is recommended for repairs, add-ons, attaching flowers,ribbons etc.

It repairs broken pieces, fixes hairline cracks, attaches greenware to greenware, attaches greenware to bisque, attaches bisque to bisque. It removes hard spots. It acts like wood putty for larger are fill-ins.

USING MARX MAGIC MENDER

MAGIC MENDER is pre-mixed so there is no need to add slip.For greenware remove excess immediately with a semi-dry scrubby.

For bisque let the Mender dry completely then clean as you would greenware.  Make sure that the mender is completely dry before firing.  Fire at the temperature recommended for the slip (up to cone 03 ... 1120°C).

INSTRUCTIONS for using Magic Mender:

• 1. Do not wet the piece to be mended.
• 2. Magic mender is pre mixed. There is no need to add any slip.
• 3. Apply mender to both sides with a soft brush. Do not over apply. Press the pieces together - when mender beads out of the sides you have full coverage. Hold the pieces together (a minute or two) until they remain joined.
• 4. If greenware: Remove excess immediately. Clean when semi- dry with a scrubber.
• 5. If bisque: Let mender dry completely, then clean it as you would clean greenware.
• 6. Fire the piece when mender is completely dry. You may apply color before firing. Fire the piece to the proper cone of the slip (up to cone 02 or 03 [2048þ]).

MARX MAGIC MENDER must be fired to become permanent.