Shop All Clays
Our most popular Clay
We have the biggest and brightest selection of coloured decorating slips available on the market today.
See our best selling Raw Materials.
See our range of finished Glazed products.
Dragon Leadfree Glaze and Slip Stains.
See our best selling Stains and Colours.
Top selling underglaze brands Amaco, Nano Colours, Spectrum and more
See our best selling Underglaze Pencils & Crayons.
See our complete range of casting, hump & press moulds.
See our range of tools, equipment and resources.
Top selling Potter's Wheels
See our best selling Wheel Accessories
See our range of wall extruders and accessories.
All Potterycrafts kilns are ROHS and WEEE compliant.
Kilns are made to order, delivery TBC (confirmed at time of ordering)
Kiln as standard with CERA-5 Controller
CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.
CERA-5+ has 5 programs each with delay start, 5 heating/cooling ramps, soak, cut off and program pause.
This controller gives the benefit multiple heating and cooling ramps for pottery firing where usually two programs are used, having five ramps allows for several heating and/or cooling phases in the program.
Delay start
Heating/Cooling Ramp
The rate of heating up or cooling down, usually expressed in number of degrees per hour, e.g. 150°C per hour. A Kiln firing to 600°C at 150°C per hour would take 4 hours.
Set Point/Target temperature
The temperature at which the controller changes the ramp rate, starts to soak or switches off. For example a program might fire at 100°C per hour to the first set point of 600°C then fire at 250°C per hour to top temperature of 1120°C.
Soak or Dwell
The periodof time that the kiln is held at a temperature in order to smooth out glazes or even out temperature in the kiln. Typically 15 to 20 minutes. Segment One part of the program, usually consisting of a ramp, a target temperature and a soak.
Event Relay
Output from a controller to operate an automatic damper,opening and closing it during the firing.
CERA-10 has 10 programs each with 10 segments. Delay start and program pause. Each segment has a heating/cooling ramp, a target temperature and a soak. This controller is ideal for firings where a range of programs are frequently used.
It can be used for any firing requiring close control over multiple heating and cooling ramps such as macro crystalglazes and for glass slumping and fusing.
A period of time to elapse before controller starts a firing, for example, inorder to make use of off-peak power.
The rate of heating up or cooling down, usually expressed in number of degrees per hour, e.g. 150°C per hour. A Kiln firing to 600°C at 150°Cper hour would take 4 hours.
The temperature at which the controller changes the ramp rate, starts to soak or switches off. For example aprogram might fire at 100°C perhour to the first set point of 600°C then fire at 250°C per hour to top temperature of1120°C.
Soakor Dwell
The period of time that the kiln is held at a temperaturein order to smooth out glazes oreven out temperature in the kiln. Typically 15 to 20 minutes. Segment One partof the program, usually consisting of a ramp, a target temperature and a soak.
Output from a controller tooperate an automatic damper, opening and closing it during the firing.
This furniture set is for the P59230 kiln.
3 - P5481/1 350x10mm CIRCULAR BATT 6 - P5518 50mm PROP 6 - P5519 100mm PROP 1 - P3380.5 0.5Kg BATT WASH
Without Extra Furniture Set
Kiln as standard with 1 Furniture Set