Pottery Crafts Ceramaster P5232 435Ltr From  £8088.35


Robust, semi-industrial front loading kilns ideal for professional studios, colleges and industrial applications where a larger capacity is required. Spiral wound elements are supported on tubes so heat from all around the element is exposed to the kiln chamber giving highly efficient use of energy. There are elements in the two side walls and floor as standard. 

 


Constructed from low thermal mass insulation brick with two high grade backup insulation boards, the roof is a traditional curved arch construction again with two layers of backup insulation, enclosed within a 2mm zintec steel powder coated frame. 
Graded Kanthal A1 Heating Elements are supported on ceramic tubes, positioned in the floor and two side walls. 
Dual contactors provide security against over-fires, when used in conjunction with Potterycrafts Kiln controllers. 
Block construction flat arched roof for greater strength and durability .
Designed for repeated high temperature firings to 1320°C (cone 11). 
Three year warranty (excluding wear parts) back-up from our staff and a network of independent service engineers. 
Technical staff available for advice on all aspects of using your kiln. 
Made in Britain at our factory in Stoke-on-Trent where our skilled staff, call on over a hundred years accumulated knowledge of kiln building.

  • Type R thermocouples fitted as standard on UK kilns.
  • Adjustable clasp door locks fitted.
  • Brick to brick door seal, no messy fibre.
  • All kilns are fitted with a Harting socket for easy controller connection
  • Roof and door vent as standard for venting of the kiln during firing and to aid cooling.
  • Standard left hand door hinges with option for right hand.
  • 2 Zone controller option available on models P5232, P5233, P5234, P5236, P5236B, P5237 & P5238.
  • Energy efficient

 

P5232 SPECIFICATIONS


Firing capacity: 435 litres (15.4 cu ft).
Maximum Temperature: 1320°C (Cone 11)
Chamber dimensions: 610mm wide x 720mm deep x 980mm high 
External dimensions: 1020mm wide x 1160mm deep x 1800mm high 
Weight: 550kg
Power: 22 kW
Supply required: 3 phase-45 amps per phase


Kiln Furniture Set: Not included in price of kiln 

16 - P5459 Batts 340 x 280 x 17 mm 
12 - P5518 Props 50 mm 
12 - P5519 Props 100mm 
12 - P5520 Props 150mm 
12 - P5521 Props 200mm 
50 - P5551 Stilts (02) 
50 - P5552 Stilts (03) 
50 - P5554 Stilts (05) 
50 - P5555 Stilts (06) 
Batt Wash 2kg

 


Controller included: CERA-2(2-program memory each with 3 segments)

You can upgrade to CERA-5 , CERA-10 orCERA-10+ for marginal extra cost.

Additional Safety Equipment available for kilns(Links Below):
Ventilation Hood
Heatlock
Auto-damper

 

Kiln is made to order, delivery is approx 4-6 weeks (this will be confirmed when ordering)



1 - Furniture Set for P5232
CHOOSE OPTION
Quantity
Pottery Crafts Furniture Set for P5232
16 - P5459 Batts 340 x 280 x 17 mm 
12 - P5518 Props 50 mm 
12 - P5519 Props 100mm 
12 - P5520 Props 150mm 
12 - P5521 Props 200mm 
50 - P5551 Stilts (02) 
50 - P5552 Stilts (03) 
50 - P5554 Stilts (05) 
50 - P5555 Stilts (06) 
Batt Wash 2kg
Pottery Crafts Without Furniture for F/L kilns
Without Furniture for F/L kilns
2 - CERA-5 Controller for Ceramaster
CHOOSE OPTION
Pottery Crafts CERA-5 Controller for Ceramaster

CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.

 

CERA-5+ has 5 programs each with delay start, 5 heating/cooling ramps, soak, cut off and program pause.

 

This controller gives the benefit multiple heating and cooling ramps for pottery firing where usually two programs are used, having five ramps allows for several heating and/or cooling phases in the program.

 

Pottery Crafts Without CERA-5 Controller
Kiln as standard with CERA-2 controller
3 - CERA-10 controller for Ceramaster
CHOOSE OPTION
Pottery Crafts CERA-10 controller for Ceramaster

CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.

 

CERA-10 has 10 programs each with 10 segments. Delay start and program pause. Each segment has a heating/cooling ramp, a target temperature and a soak. This controller is ideal for firings where a range of programs are frequently used.

It can be used for any firing requiring close control over multiple heating and cooling ramps such as macro crystalglazes and for glass slumping and fusing.

Pottery Crafts Without CERA-10 Controller
kiln without CERA-10, as standard with CERA-2
4 - CERA-10+ Controller for Ceramaster
CHOOSE OPTION
Pottery Crafts CERA-10+ Controller for Ceramaster

CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.

 

CERA-10 has 10 programs each with 10 segments. Delay start and program pause. Each segment has a heating/cooling ramp, a target temperature and a soak. This controller is ideal for firings where a range of programs are frequently used.

It can be used for any firing requiring close control over multiple heating and cooling ramps such as macro crystalglazes and for glass slumping and fusing.

Pottery Crafts Without CERA-10 Controller
kiln without CERA-10, as standard with CERA-2
5 - Ventilation Hood For P5232
CHOOSE OPTION
Pottery Crafts Ventilation Hood For P5232

KM208 Zintec Hood for P5232 Ceramaster Kiln

The ventilation hood is designed to remove the excess heatfrom the kiln area.
It is positioned directly above the kiln and so it removes the air directly from around thekiln, as well as fumes from the flue, keeping the kiln area cooler.
The hood has a 150mm diameter spigot on top for connection to customers’ exhaust ducting.
We recommend connecting the spigot directly to the room extraction system or to an exhaust fan to prevent leakage of fumes into the kiln room. 
No electrical connections are required.

Pottery Crafts Without Ventilation Hood
Without Ventilation Hood
6 - Heatlock
CHOOSE OPTION
Pottery Crafts Heatlock

PFL/HL HeatLock 

The Heatlock keeps the kiln door locked until the kiln has cooled to a safe temperature preventing damage to kiln door and eliminating risk of burning. The lock is discretely positioned adjacent to the interlock key under the door of our front loading kilns; it is operated by a small controller pre-set to lock at 60°C in the heating cycle and to unlock at 55°C on cooling. A warning light indicates when the door is locked, when the light goes out it is safe to open the kiln. The HeatLock is failsafe, if the power is turned off it remains locked, the door can only be opened when powered up and the temperature has dropped to 55°C.

Pottery Crafts Without Heatlock
Without Heatlock
7 - Auto Damper
CHOOSE OPTION
Pottery Crafts Auto Damper

PFL/AD Auto-damper

The damper is pre-set to close when the kiln temperature reaches 550°C, it opens again when the kiln cools down to 200°C. There is no need to set the opening and closing temperature and no complicated controller as the temperatures are factory pre-set. The auto-damper eliminates the need to come back to the kiln during firing and removes the risk of the flue remaining open throughout the firing creating a potential hazard.

Pottery Crafts Without Auto Damper
Without Auto Damper