Pottery Crafts Ceramaster P5237 1060Ltr From  £14360.54

Robust, semi-industrial front loading kilns ideal for professional studios, colleges and industrial applications where a larger capacity is required. Spiral wound elements are supported on tubes so heat from all around the element is exposed to the kiln chamber giving highly efficient use of energy. There are elements in the two side walls and floor as standard

Constructed from low thermal mass insulation brick with two high grade backup insulation boards, the roof is a traditional curved arch construction again with two layers of backup insulation, enclosed within a 2mm zintec steel powder coated frame. 
Graded Kanthal A1 Heating Elements are supported on ceramic tubes, positioned in the floor and two side walls. 
Dual contactors provide security against over-fires, when used in conjunction with Potterycrafts Kiln controllers. 
Block construction flat arched roof for greater strength and durability .
Designed for repeated high temperature firings to 1320°C (cone 11). 
Three year warranty (excluding wear parts) back-up from our staff and a network of independent service engineers. 
Technical staff available for advice on all aspects of using your kiln. 
Made in Britain at our factory in Stoke-on-Trent where our skilled staff, call on over a hundred years accumulated knowledge of kiln building.

• Type R thermocouples fitted as standard on UK kilns.
• Adjustable clasp door locks fitted.
• Brick to brick door seal, no messy fibre.
• All kilns are fitted with a Harting socket for easy controller connection
• Roof and door vent as standard for venting of the kiln during firing and to aid cooling.
• Standard left hand door hinges with option for right hand.
• 2 Zone controller option available on models P5232, P5233, P5234, P5236, P5236B, P5237 & P5238.
• Energy efficient.

P5237 SPECIFICATIONS

Firing capacity: 1060 litres (37 cu ft).
Maximum Temperature: 1320°C (Cone 11)
Chamber dimensions: 820mm wide x 1000mm deep x 1290mm high.
External dimensions: 1230mm wide x 1670mm deep x 2230mm high (49” x 65½” x 87½”)
Weight: 1650kg
Power: 55kW
Supply required: 3 phase-100 amps per phase

Kiln Furniture Set: Not included in price of kiln

15 x P5485 Batts 500 x 380 x 15mm
18 x P5518 Props 50mm 
18 x P5519 Props 100mm 
18 x P5520 Props 150mm 
18 x P5521 Props 200mm 
50 x P5551 Stilts (02) 
50 x P5552 Stilts (03) 
50 x P5554 Stilts (05)
50x P5555 Stilts (06) 
Batt Wash 2kg

Controller included: CERA-2(2-program memory each with 3 segments)
You can upgrade to CERA-5 , CERA-10 or CERA-10+ for marginal extra cost.

Kiln is made to order, delivery is approx 4-6 weeks (this will be confirmed when ordering)