Pottery Crafts Fireworker ECO P5910/A 50Ltr From  £1701.49


The P5910/A is a small bench mounted kiln designed for test firing clays and glazes without having to fire a large kiln. 
These kilns are constructed of a low thermal mass insulation brick with a high grade backup insulation board this is all enclosed within a high quality pressed steel powder coatedframe. 
Kanthal A1 spiral wound elements are used to heat the kiln, the elements are located in grooves within the side walls of the kiln to allow uniform heat distribution throughout the chamber 
All Genesis kilns are CE marked and have captive key interlocks fitted to break full load upon opening the kiln to comply with both UK and European legislation, in addition to this all Potterycrafts Genesis kilns are now fitted with two contactors as standard togive greater protection against possible over-fires, when used in conjunction with our range of microprocessorcontrollers. 
Brick to brick door seal, no messy fibre.

Type "R" thermocouples fitted as standard on UK kilns.

 

 
  • Adjustable clasp door lock fitted.
  • All kilnsare fitted with a Harting socket for easy controller connection.
  • Roof bung hole and plug as standard to assist with venting of the kiln and cooling.
  • Self assembly kiln stand option available with built in shelf.
  • Furniture set available

P5910/A SPECIFICATIONS


Firing capacity: 50 litres (1.77 cu ft). 
Maximum Temperature: 1200°C 
Chamber dimensions: 400mm wide x380mm deep x 350mm high (15” x 15” x 13”). 
External dimensions: 630mm wide x 737mm deep x 760mm high (24” x 29” x30”) 
Weight: 92kgs 
Power: 3.0 kW 
Supply required: Single Phase - 13 amps


Kiln Furniture Set: Not Included in price of kiln 

2 - P5482 BATTS 360x 360 x 13mm
3 - P5518 Tubular Prop 50mm 
12 - P5525 Castellated Prop 25mm
12 - P5526 Castellated Prop 38mm 
1 - P3380.5 BATT WASH (0.5Kg)

 


Kiln Stand Accessory: Not included in price of kiln



1 - Furniture Set for Fireworker Kilns
CHOOSE OPTION
Quantity
Pottery Crafts Furniture Set for Fireworker Kilns

Furniture Set for:

Fireworker 50ltr

Fireworker ECO 50Ltr 

Fireworker 68Ltr

 

2 - P5482 BATTS 360x 360 x 13mm
3 - P5518 Tubular Prop 50mm 
12 - P5525 Castellated Prop 25mm
12 - P5526 Castellated Prop 38mm 
1 - P3380.5 BATT WASH (0.5Kg)

Pottery Crafts Without Furniture for F/L kilns
Without Furniture for F/L kilns
2 - CERA-5 Controller for Small F/L kilns
CHOOSE OPTION
Pottery Crafts CERA-5 Controller for Small F/L kilns

CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.

 

CERA-5+ has 5 programs each with delay start, 5 heating/cooling ramps, soak, cut off and program pause.

 

This controller gives the benefit multiple heating and cooling ramps for pottery firing where usually two programs are used, having five ramps allows for several heating and/or cooling phases in the program.

Pottery Crafts Without CERA-5 Controller
Kiln as standard with CERA-2 controller
3 - CERA-10 Controller for Small F/L kilns
CHOOSE OPTION
Pottery Crafts CERA-10 Controller for Small F/L Kilns

CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.

 

CERA-10 has 10 programs each with 10 segments. Delay start and program pause. Each segment has a heating/cooling ramp, a target temperature and a soak. This controller is ideal for firings where a range of programs are frequently used.

It can be used for any firing requiring close control over multiple heating and cooling ramps such as macro crystalglazes and for glass slumping and fusing.

 

Pottery Crafts Without CERA-10 Controller
kiln without CERA-10, as standard with CERA-2
4 - CERA-10+ Controller for Small F/L Kilns
CHOOSE OPTION
Pottery Crafts CERA-10+ Controller for Small F/L Kilns

CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.

 

CERA-10 has 10 programs each with 10 segments. Delay start and program pause. Each segment has a heating/cooling ramp, a target temperature and a soak. This controller is ideal for firings where a range of programs are frequently used.

It can be used for any firing requiring close control over multiple heating and cooling ramps such as macro crystalglazes and for glass slumping and fusing.

Pottery Crafts Wihtout CERA-10+ Controller
Kiln as standard with CERA-2 Controller
5 - Stand for Genesis and Fireworker Kilns
CHOOSE OPTION
Pottery Crafts Stand for Genesis and Fireworker Kilns

Stand for Genesis and Fireworker Kilns

 

Size approx

 
Width 655mm 
Depth 660mm 
Height 730mm

Pottery Crafts Without Stand
Kiln supplied without stand