Shop All Clays
Our most popular Clay
We have the biggest and brightest selection of coloured decorating slips available on the market today.
See our best selling Raw Materials.
See our range of finished Glazed products.
Dragon Leadfree Glaze and Slip Stains.
See our best selling Stains and Colours.
Top selling underglaze brands Amaco, Nano Colours, Spectrum and more
See our best selling Underglaze Pencils & Crayons.
See our complete range of casting, hump & press moulds.
See our range of tools, equipment and resources.
Top selling Potter's Wheels
See our best selling Wheel Accessories
See our range of wall extruders and accessories.
The P5910/A is a small bench mounted kiln designed for test firing clays and glazes without having to fire a large kiln. These kilns are constructed of a low thermal mass insulation brick with a high grade backup insulation board this is all enclosed within a high quality pressed steel powder coatedframe. Kanthal A1 spiral wound elements are used to heat the kiln, the elements are located in grooves within the side walls of the kiln to allow uniform heat distribution throughout the chamber All Genesis kilns are CE marked and have captive key interlocks fitted to break full load upon opening the kiln to comply with both UK and European legislation, in addition to this all Potterycrafts Genesis kilns are now fitted with two contactors as standard togive greater protection against possible over-fires, when used in conjunction with our range of microprocess or controllers. Brick to brick door seal, no messy fibre.
Firing capacity: 50 litres (1.77 cu ft). Maximum Temperature: 1300°C Chamber dimensions: 400mm wide x380mm deep x 350mm high (15” x 15” x 13”). External dimensions: 630mm wide x 737mm deep x 760mm high (24” x 29” x30”) Weight: 92kgs Power: 4.5 kW Supply required: Single Phase - 20 amps
Kiln Furniture Set: Not included in price of kiln
2 - P5482 BATTS 360x 360 x 13mm 3 - P5518 Tubular Prop 50mm 12 - P5525 Castellated Prop 25mm 12 - P5526 Castellated Prop 38mm 1 - P3380.5 BATT WASH (0.5Kg)
Controller included: CERA-5 or CERA-10+ for marginal extra cost.
Kiln is made to order, delivery approx 4-6 weeks (this will be confirmed when ordering)
Furniture Set for:
Fireworker 50ltr
Fireworker ECO 50Ltr
Fireworker 68Ltr
CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.
CERA-10 has 10 programs each with 10 segments. Delay start and program pause. Each segment has a heating/cooling ramp, a target temperature and a soak. This controller is ideal for firings where a range of programs are frequently used.
It can be used for any firing requiring close control over multiple heating and cooling ramps such as macro crystalglazes and for glass slumping and fusing.
Stand for Genesis and Fireworker Kilns
Size approx
Width 655mm Depth 660mm Height 730mm