How the Scarva Earthstone ES70 Architectural Body Clay was born.
Our most popular clay loved by all.
We have the biggest and brightest selection of coloured decorating slips available on the market today.
See our best selling Raw Materials.
See our range of finished Glazed products.
Dragon Leadfree Glaze and Slip Stains.
See our best selling Stains and Colours.
Top selling underglaze brands Amaco, Nano Colours, Spectrum and more
See our best selling Underglaze Pencils & Crayons.
See our range of tools, equipment and resources.
See our range of wall extruders and accessories.
Everything in this section is reduced to clear. Grab a bargain! While stocks last!
The P5901/A is a small bench mounted kiln designed for test firing clays and glazes without having to fire a large kiln.
These kilns are constructed of a lowthermal mass insulation brick with a high grade backup insulation board this is all enclosed within a high quality pressed steel powder coated frame.
Kanthal A1 spiral wound elements are used to heat the kiln, the elements are located ingrooves within the side walls of the kiln to allow uniform heat distribution throughout the chamber
All Genesis kilns are CE marked and have captive key interlocks fitted to break full load upon opening the kiln to complywith both UK and European legislation, in addition to this all Potterycrafts Genesis kilns are now fitted with two contactors as standard to give greater protection against possible over-fires, when used in conjunction with our range of microprocessor controllers.
Brick to brick door seal, no messy fibre.
Firing capacity: 40 litres (1.41 cu ft).
Maximum Temperature: 1260°C (Cone 8)
Chamber dimensions: 340mm wide x380mm deep x 310mm high
External dimensions: 590mm wide x 737mm deep x 673mm high
Power: 3.0 kW
Supply required: Single Phase - 13 amps
Kiln Furniture Set: Not included in price of kiln
3 - P5424 BATTS 361 x 292 x 13mm
12 - P5526 CASTELLATED PROPS 38mm
1 - P3380.5 BATT WASH
Kiln Stand Accessory:Not included in price of kiln
Kiln is made to order, delivery time approx 4-6 weeks (this will be confirmed when ordering)
CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.
CERA-5+ has 5 programs each with delay start, 5 heating/cooling ramps, soak, cut off and program pause.
This controller gives the benefit multiple heating and cooling ramps for pottery firing where usually two programs are used, having five ramps allows for several heating and/or cooling phases in the program.
CERA-10 has 10 programs each with 10 segments. Delay start and program pause. Each segment has a heating/cooling ramp, a target temperature and a soak. This controller is ideal for firings where a range of programs are frequently used.
It can be used for any firing requiring close control over multiple heating and cooling ramps such as macro crystalglazes and for glass slumping and fusing.
Stand for Genesis and Fireworker Kilns