Pottery Crafts Potterycrafts Lightmaster P5117 100Ltr From  £3268.55


All Lightmaster kilns are CE marked and have captive key interlocks fitted to break full load before opening the kiln complying with both UK and European legislation.

Kanthal A1 spiral wound elements are used to heat the kiln. The elements are graded and located in grooves in the side walls and floor of the kiln giving uniform heat distribution throughout the chamber.

Potterycrafts Lightmaster kilns have dual contactors to provide protection against possible over-fires, when used in conjunction with Potterycrafts Kiln Controllers.

The kilns are constructed of a durable low thermal mass insulation brick with two high grade backup insulation boards this is all enclosed within a robust high quality pressed steel powder coated frame

  • Type 'R' thermocouples fitted as standard on UK kilns.
  • Adjustable clasp door locks fitted.
  • Stainless steel surround.
  • Brick to brick door seal.
  • All kilns are fitted with a Harting socket for easy controller connection.
  • Mains power indicator.
  • Wired for single or three phase connection.
  • Roof and door vent as standard for venting the kiln during firing and to aid cooling.
  • Energy efficient.

 

P5117 SPECIFICATIONS

Firing capacity: 100 litres 
Maximum Temperature: 1300°C (Cone10) 
Chamber dimensions: mm: 460 wide x 400 deep x 560 high 
External dimensions: mm : 730 wide x 860 deep x 1450 high 
Weight: 250kg 
Power: 6.0 kW 
Supply required: Single Phase- 32amps or 3 phase-10 amps per phase 


Kiln Furniture Set: Not included in price of kiln

4 - P5484 BATTS 380 x 430 x 15mm
9 - P5518 PROPS 50 mm
9 - P5519 PROPS 100 mm
9 - P5520 PROPS 150mm
1 - P3380-01 BATT WASH (1Kg)


Controller included: CERA-2(2-program memory each with 3 segments)


You can upgrade to CERA-5+ , CERA-10 or CERA-10+ for marginal extra cost.


Additional Safety Equipment available for P5117 Kiln


Ventilation Hood 
Heatlock
Auto-damper

 

Kiln is made to order, delivery approx 4-6 weeks (this will be confirmed when ordering)

 



1 - Furniture Set for P5117
CHOOSE OPTION
Quantity
Pottery Crafts Furniture Set for P5117
4 - P5484 BATTS 380 x 430 x 15mm
9 - P5518 PROPS 50 mm
9 - P5519 PROPS 100 mm
9 - P5520 PROPS 150mm
1 - P3380-01 BATT WASH (1Kg)
Pottery Crafts Without Furniture for F/L kilns
Without Furniture for F/L kilns
2 - Select Phase
CHOOSE OPTION
Pottery Crafts Single Phase
Single Phase power supply
Pottery Crafts Three Phase
Three Phase power supply
3 - CERA-5+ Controller for Light Master Kilns
CHOOSE OPTION
Pottery Crafts CERA-5+ Controller for Light Master Kilns

CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.

 

CERA-5+ has 5 programs each with delay start, 5 heating/cooling ramps, soak, cut off and program pause.

 

This controller gives the benefit multiple heating and cooling ramps for pottery firing where usually two programs are used, having five ramps allows for several heating and/or cooling phases in the program.

Pottery Crafts Without CERA-5 Controller
Kiln as standard with CERA-2 controller
4 - CERA-10 Controller for Light Master Kiln
CHOOSE OPTION
Pottery Crafts CERA-10 Controller for Light Master Kiln

CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.

 

CERA-10 has 10 programs each with 10 segments. Delay start and program pause. Each segment has a heating/cooling ramp, a target temperature and a soak. This controller is ideal for firings where a range of programs are frequently used.

It can be used for any firing requiring close control over multiple heating and cooling ramps such as macro crystalglazes and for glass slumping and fusing.

Pottery Crafts Wihtout CERA-10+ Controller
Kiln as standard with CERA-2 Controller
5 - CERA-10+ Controller for Light Master Kilns
CHOOSE OPTION
Pottery Crafts CERA-10+ Controller for Light Master Kiln

CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.

 

CERA-10 has 10 programs each with 10 segments. Delay start and program pause. Each segment has a heating/cooling ramp, a target temperature and a soak. This controller is ideal for firings where a range of programs are frequently used.

It can be used for any firing requiring close control over multiple heating and cooling ramps such as macro crystalglazes and for glass slumping and fusing.

Pottery Crafts Without CERA-10 Controller
kiln without CERA-10, as standard with CERA-2
6 - Ventilation Hood for P5941/P5117
CHOOSE OPTION
Pottery Crafts Ventilation Hood for P5941/P5117

KM205 Zintec Hood for P5941 Heatworker and P5117 Lightmaster Kilns.

 

The ventilation hood is designed to remove the excess heat from the kiln area.
It is positioned directly above the kiln and so it removes the air directly from around the kiln, as well as fumes from the flue, keeping the kiln area cooler.
The hood has a 150mmdiameter spigot on top for connection to customers’ exhaust ducting.
We recommend connecting the spigotdirectly to the room extraction system or to an exhaust fan to prevent leakage of fumes into the kiln room. 
No electrical connections are required.

 

Ventilation Hood & Mounting Brackets

Pottery Crafts Without Ventilation Hood
Without Ventilation Hood
7 - Heatlock
CHOOSE OPTION
Pottery Crafts Heatlock

PFL/HL HeatLock 

The Heatlock keeps the kiln door locked until the kiln has cooled to a safe temperature preventing damage to kiln door and eliminating risk of burning. The lock is discretely positioned adjacent to the interlock key under the door of our front loading kilns; it is operated by a small controller pre-set to lock at 60°C in the heating cycle and to unlock at 55°C on cooling. A warning light indicates when the door is locked, when the light goes out it is safe to open the kiln. The HeatLock is failsafe, if the power is turned off it remains locked, the door can only be opened when powered up and the temperature has dropped to 55°C.

Pottery Crafts Without Heatlock
Without Heatlock
8 - Auto Damper
CHOOSE OPTION
Pottery Crafts Auto Damper

PFL/AD Auto-damper

The damper is pre-set to close when the kiln temperature reaches 550°C, it opens again when the kiln cools down to 200°C. There is no need to set the opening and closing temperature and no complicated controller as the temperatures are factory pre-set. The auto-damper eliminates the need to come back to the kiln during firing and removes the risk of the flue remaining open throughout the firing creating a potential hazard.

Pottery Crafts Without Auto Damper
Without Auto Damper