Pottery Crafts Test Kiln P5900 9Ltr From  £1305.92


The P5900 is a small bench mounted kiln designed for test firing clays and glazes without having to fire a large kiln. 
These kilns are constructed of a low thermal mass insulation brick with a high grade backup insulation board this is all enclosed within a high quality pressed steel powder coated frame. 
Kanthal A1 spiral wound elements are used to heat the kiln, the elements arelocated in grooves within the side walls of the kiln to allow uniform heat distribution throughout the chamber 
All Genesis kilns are CE marked and have captive key interlocks fitted to break full load upon opening the kiln tocomplywith both UK and European legislation, in addition to this all Potterycrafts Genesis kilns are now fitted with two contactors as standard to give greater protection against possible over-fires, when used in conjunction with our rangeof microprocessor controllers. 
Brick to brick door seal, no messy fibre.

 


Type "R" thermocouples fitted as standard on UK kilns.
  • Adjustable clasp door lock fitted.
  • All kilns are fitted with a Harting socket for easy controller connection.
  • Roof bung hole and plug as standard to assist with venting of the kiln and cooling.
  • Self assembly kiln stand option available with built in shelf.
  • Furniture set available

 

P5900 SPECIFICATIONS


Firing capacity: 9 litres (0.3 cu/ft)
Maximum Temperature: 1300°C (Cone 10)
Chamber dimensions: 180mm wide x 230mm deep x 230mm high
External dimensions: 360mm wide x 490mm deep x 460mm high
Weight: 50Kg 
Power: 2.5 kW 
Supply Required Single Phase (Amps): 13A
 

Kiln Furniture Set: Not included in price of kiln 

3 - P5412 BATTS 203 x 152 x 13mm
9 - P5506 PROPS 25mm
1 - P3380.5 BATT WASH


Controller included: CERA-2 (2-program memory each with3segments) 


You can upgrade to CERA-5 , CERA-10 or CERA-10+ for marginal extra cost.

 

Kiln is made to order, delivery time approx 4-6 weeks (will be confirmed when ordering)


1 - Furniture Set for P5900
CHOOSE OPTION
Quantity
Pottery Crafts Furniture Set for P5900

3 - P5412 BATTS 203 x 152 x 13mm
9 - P5506 PROPS 25mm
1 - P3380.5 BATT WASH

 
Pottery Crafts Without Furniture for F/L kilns
Without Furniture for F/L kilns
2 - CERA-5 Controller for Small F/L kilns
CHOOSE OPTION
Pottery Crafts CERA-5 Controller for Small F/L kilns

CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.

 

CERA-5+ has 5 programs each with delay start, 5 heating/cooling ramps, soak, cut off and program pause.

 

This controller gives the benefit multiple heating and cooling ramps for pottery firing where usually two programs are used, having five ramps allows for several heating and/or cooling phases in the program.
Pottery Crafts Without CERA-5 Controller
Kiln as standard with CERA-2 controller
3 - CERA-10 Controller for Small F/L kilns
CHOOSE OPTION
Pottery Crafts CERA-10 Controller for Small F/L Kilns

CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.

 

CERA-10 has 10 programs each with 10 segments. Delay start and program pause. Each segment has a heating/cooling ramp, a target temperature and a soak. This controller is ideal for firings where a range of programs are frequently used.

It can be used for any firing requiring close control over multiple heating and cooling ramps such as macro crystalglazes and for glass slumping and fusing.

 
Pottery Crafts Without CERA-10 Controller
kiln without CERA-10, as standard with CERA-2
4 - CERA-10+ Controller for Small F/L Kilns
CHOOSE OPTION
Pottery Crafts CERA-10+ Controller for Small F/L Kilns

CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.

 

CERA-10 has 10 programs each with 10 segments. Delay start and program pause. Each segment has a heating/cooling ramp, a target temperature and a soak. This controller is ideal for firings where a range of programs are frequently used.

It can be used for any firing requiring close control over multiple heating and cooling ramps such as macro crystalglazes and for glass slumping and fusing.
Pottery Crafts Wihtout CERA-10+ Controller
Kiln as standard with CERA-2 Controller