How the Scarva Earthstone ES70 Architectural Body Clay was born.
Our most popular clay loved by all.
We have the biggest and brightest selection of coloured decorating slips available on the market today.
See our best selling Raw Materials.
See our range of finished Glazed products.
Dragon Leadfree Glaze and Slip Stains.
See our best selling Stains and Colours.
Top selling underglaze brands Amaco, Nano Colours, Spectrum and more
See our best selling Underglaze Pencils & Crayons.
See our range of tools, equipment and resources.
See our range of wall extruders and accessories.
Everything in this section is reduced to clear. Grab a bargain! While stocks last!
The New P59590 is Potterycrafts Topworker Professional Top Loading kiln made in our Stoke-on-Trent factory, with a capacity of 190 litres (6.6 cu/ft) this model of kiln is ideal for professional studios and schools and colleges working on a medium to large scale.br>
The Side walls are low thermal mass 23 Grade 76mm thick bubble insulation brick with a 25mm backup insulation giving 101mm of insulation.
Outer jacket is stainless steel with adjustable tensioning clamps to enable the kiln to always be kept ridged throughout its lifetime.
The kiln lid is also low thermal mass 23 Grade 76mm thick backed up with 12.5mm of high grade fibre board giving a lid thickness of 88.5mm.
The lid top has a powder coated steel cover plate.
Gas struts make opening the kiln effortless.
The lid hinge allows the lid to move freely reducing the risk cracking during the firing.
The kiln floor 108mm of super-efficient Ultralite granular insulation normally found in industrial kilns.
Three support bricks are located in the base to enable a shelf/batt to be placed above the insulation.
Firing Capacity: 188 litres (6.6 cu/ft).
Maximum Temperature: 1300°C (Cone 10)
Chamber Dimensions: 650mm wide x 570mm deep
External Dimensions: 850mm wide x 1090mm deep x 990mm high
Power: 12.0 kW
Supply Required Single Phase (Amps): 63A
Supply Required 3 Phase (Amps): 25A
Kiln Furniture Set Available: Not included in price of kiln
3 X P5472 585mm CIRCULAR BATT
12 X P5525 25mm CASTELLATED PROP
15 X P5526 38mm CASTELLATED PROP
1 X P3380-01 BATT WASH (1Kg)
Controller included: CERA-2 (2-program memory each with 3 segments)
You can upgrade to CERA-5 , CERA-10 or CERA-10+ for marginal extra cost.
Kiln is made to order, delivery time approx 4-6 weeks (will be confirmed when ordering)
Furniture Set for P59590
Suitable for Topworker 150ltr up to 450ltr
CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.
CERA-5+ has 5 programs each with delay start, 5 heating/cooling ramps, soak, cut off and program pause.
This controller gives the benefit multiple heating and cooling ramps for pottery firing where usually two programs are used, having five ramps allows for several heating and/or cooling phases in the program.
CERA-10 Controller for Topworker
CERA-10 has 10 programs each with 10 segments. Delay start and program pause. Each segment has a heating/cooling ramp, a target temperature and a soak. This controller is ideal for firings where a range of programs are frequently used.
It can be used for any firing requiring close control over multiple heating and cooling ramps such as macro crystalglazes and for glass slumping and fusing.
Suitable for Topworkers 150ltr to 450ltr