How the Scarva Earthstone ES70 Architectural Body Clay was born.
Our most popular clay loved by all.
We have the biggest and brightest selection of coloured decorating slips available on the market today.
See our best selling Raw Materials.
See our range of finished Glazed products.
Dragon Leadfree Glaze and Slip Stains.
See our best selling Stains and Colours.
Top selling underglaze brands Amaco, Nano Colours, Spectrum and more
See our best selling Underglaze Pencils & Crayons.
See our range of tools, equipment and resources.
See our range of wall extruders and accessories.
Everything in this section is reduced to clear. Grab a bargain! While stocks last!
The New P59750 is Potterycrafts Topworker Professional Top Loading kiln made in our Stoke-on-Trent factory, with a capacity of 80 litres (2.8 cu/ft) this model of kiln is ideal for professional studios and schools and colleges working on a medium to large scale.
Firing Capacity: 79 litres (2.8 cu/ft).
Maximum Temperature: 1300°C (Cone 10)
Chamber Dimensions: 460mm wide x 460mm deep
External Dimensions: 670mm wide x 890mm deep x 880mm high
Power: 6.6 kW
Supply Required Single Phase (Amps): 32A
Supply Required 3 Phase (Amps): 10A
Kiln Furniture Set Available: not included in price of kiln
2 - P5471 420mm CIRCULAR BATT
9 - P5525 25mm CASTELLATED PROP
6 - P5526 38mm CASTELLATED PROP
1 - P3380-01 BATT WASH (1Kg)
Controller included: CERA-2(2-program memory each with 3 segments)
You can upgrade to CERA-5 , CERA-10 or CERA-10+ for marginal extra cost
The Side walls are low thermal mass 23 Grade 76mm thick bubble insulation brick with a 25mm backup insulation giving 101mm of insulation.
Outer jacket is stainless steel with adjustable tensioning clamps to enable the kiln to always be kept ridged throughout its lifetime.
The kiln lid is also low thermal mass 23 Grade 76mm thick backed up with 12.5mm of high grade fibre board giving a lid thickness of 88.5mm.
The lid top has a powder coated steel cover plate.
Gas struts make opening the kiln effortless.
The lid hinge allows the lid to move freely reducing the risk cracking during the firing.
The kiln floor 108mm of super-efficient Ultralite granular insulation normally found in industrial kilns.
Three support bricks are located in the base to enable a shelf/batt to be placed above the insulation.
Kiln is made to order, delivery approx 4-6 weeks(will be confirmed when ordering)
Without Extra Furniture Set
Kiln as standard with 1 Furniture Set
CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.
CERA-5+ has 5 programs each with delay start, 5 heating/cooling ramps, soak, cut off and program pause.
This controller gives the benefit multiple heating and cooling ramps for pottery firing where usually two programs are used, having five ramps allows for several heating and/or cooling phases in the program.
CERA-10 has 10 programs each with 10 segments. Delay start and program pause. Each segment has a heating/cooling ramp, a target temperature and a soak. This controller is ideal for firings where a range of programs are frequently used.
It can be used for any firing requiring close control over multiple heating and cooling ramps such as macro crystalglazes and for glass slumping and fusing.