Pottery Crafts Topworker P59770 225Ltr From  £3410.36


The New P59770 is Potterycrafts Topworker Professional Top Loading kiln made in our Stoke-on-Trent factory, with a capacity of 225 litres (8.1 cu/ft) this model of kiln is ideal for professional studios and schools and colleges working on a medium to large scale.

 

Key Features


The Side walls are low thermal mass 23 Grade 76mm thick bubble insulation brick with a 25mm backup insulation giving 101mm of insulation. 
Outer jacket is stainless steel with adjustable tensioning clamps to enable the kiln to always be kept ridged throughout its lifetime. 
The kiln lid is also low thermal mass 23 Grade 76mm thick backed up with 12.5mm of high grade fibre board giving a lid thickness of 88.5mm. 
The lid top has a powder coated steel cover plate. 
Gas struts make opening the kiln effortless. 
The lid hinge allows the lid to move freely reducing the risk cracking during the firing. 
The kiln floor 108mm of super-efficient Ultralite granular insulation normally found in industrial kilns. 
Three support bricks are located in the base to enable a shelf/batt to be placed above the insulation.

 

P59770 SPECIFICATIONS


Firing Capacity: 225 litres (8 cu/ft). 
Maximum Temperature: 1300°C (Cone 10) 
Chamber Dimensions: 650mm wide x 690mm deep
External Dimensions: 840mm wide x 1090mm deep x 1110mm high
Weight: 152Kg 
Power: 13 kW 
Supply Required Single Phase (Amps): 63A 
Supply Required 3 Phase (Amps): 25A 
 

Kiln Furniture Set Available: Not included in price of kiln

 

3 X P5472 585mm CIRCULAR BATT
18 X P5525 25mm CASTELLATED PROP
18 X P5526 38mm CASTELLATED PROP
1 X P3380-01 BATT WASH (1Kg)


Controller included: CERA-2 (2-program memory each with 3 segments) 

You can upgrade to CERA-5 , CERA-10 or CERA-10+ for marginal extra cost.

 

Kiln is made to order, delivery approx 4-6 weeks (will be confirmed when ordering)



1 - Furniture Set for P59770
CHOOSE OPTION
Quantity
Pottery Crafts Furniture Set for P59770

Furniture Set for P59770

 

3 X P5472 585mm CIRCULAR BATT
18 X P5525 25mm CASTELLATED PROP
18 X P5526 38mm CASTELLATED PROP
1 X P3380-01 BATT WASH (1Kg)

Pottery Crafts Without Furniture for Potterycrafts kiln
Kiln as standard without any kiln furniture
2 - Select Phase
CHOOSE OPTION
Pottery Crafts Single Phase
Single Phase power supply
Pottery Crafts Three Phase
Three Phase power supply
3 - CERA-5 Controller for Topworker
CHOOSE OPTION
Pottery Crafts CERA-5 Controller for Topworker

Suitable for Topworker 150ltr up to 450ltr

 

CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.

 

CERA-5+ has 5 programs each with delay start, 5 heating/cooling ramps, soak, cut off and program pause.

 

This controller gives the benefit multiple heating and cooling ramps for pottery firing where usually two programs are used, having five ramps allows for several heating and/or cooling phases in the program.

Pottery Crafts Without CERA-5 Controller
Without CERA-5 controller, kiln as standard with TC3300-1 controller
4 - CERA-10 Controller for Topworker
CHOOSE OPTION
Pottery Crafts CERA-10 Controller for Topworker

CERA-10 Controller for Topworker 

 

CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.

 

CERA-10 has 10 programs each with 10 segments. Delay start and program pause. Each segment has a heating/cooling ramp, a target temperature and a soak. This controller is ideal for firings where a range of programs are frequently used.

It can be used for any firing requiring close control over multiple heating and cooling ramps such as macro crystalglazes and for glass slumping and fusing.

Pottery Crafts Without CERA-10 Controller
Without CERA-10 Controller, kiln as standard with TC3300-1 controller
5 - CERA-10+ Controller for Topworker
CHOOSE OPTION
Pottery Crafts CERA-10+ Controller for Topworker

Suitable for Topworkers 150ltr to 450ltr

 

CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.

 

CERA-10 has 10 programs each with 10 segments. Delay start and program pause. Each segment has a heating/cooling ramp, a target temperature and a soak. This controller is ideal for firings where a range of programs are frequently used.

It can be used for any firing requiring close control over multiple heating and cooling ramps such as macro crystalglazes and for glass slumping and fusing.

Pottery Crafts Without CERA-10 + Controller
Without CERA-10 + Controller, kiln as standard with TC3300-1