How the Scarva Earthstone ES70 Architectural Body Clay was born.
Our most popular clay loved by all.
We have the biggest and brightest selection of coloured decorating slips available on the market today.
See our best selling Raw Materials.
See our range of finished Glazed products.
Dragon Leadfree Glaze and Slip Stains.
See our best selling Stains and Colours.
Top selling underglaze brands Amaco, Nano Colours, Spectrum and more
See our best selling Underglaze Pencils & Crayons.
See our range of tools, equipment and resources.
See our range of wall extruders and accessories.
Everything in this section is reduced to clear. Grab a bargain! While stocks last!
Frontloaders ELS series Ergo Load System ELS-S
ROHDE Frontloaders with Ergo Load System from the ELS-S series comprise six models with kiln volumes between 150 and 1000 litres. The heating elements are mounted on support rods. 5-side heating provides even distribution of heat in each performance range.
Frontloaders from the ELS-S series were designed for daily use over many years in professional workshops at fi ring temperatures up to 1320°C. In addition, they meet highest requirements for everyday applications in schools.
The ELS 150 S Frontloader with Ergo Load System has a volume of 150 litres and is a kiln from the ELS-S series suitable for temperatures to 1320°C.
Specifications on Kiln
Model ELS-1000 S
Max Temp 1320oC
Internal Dimensions (mm) W-920 x D-1060 x H-1145
External Dimensions (mm) W-1670 x D-1730 x H-2100
Supply 100 Amps
Kiln Shelf Size(mm) W-470 x D-435 (2)
Kiln is supplied with TC304 or ST215 Controller
Additional switch cabinet on left side
PLEASE ALLOW 4-6 WEEKS FOR DELIVERY
Clearly structured control unit and easy to operate, for use in workshops, schools and hobby rooms.
Clearly structured control unit and easy to operate, for use in workshops, schools and hobby rooms.•
• 10 programs
• Up to 16 segments per program
• 1 controlled heating / cooling ramp + 1 soak per segment
• Ideal for glass or ceramics use
• Soak times up to 99hr 59min
• Ramp rates from 1 to 999°/hour + FULL
• Programs can be reviewed or altered while firing
• Program Pause & Segment Advance facilities
• Keyboard lockable
• Delayed start facility - up to 99hr 59min
• Power failure recovery
• Energy used display
• Worldwide operation
• °C/°F switchable display
• Standard alarm / safety relay with alarm buzzer FEATURES
3 Zone Control Option for ROHDE model Kilns - Can only be added as an option when ordering a NEW kiln.
3 Zone Control option INCLUDES Controller ST 630 (do not change the Controller Option to ST630 - leave as default controller option)
Zone Control kilns have a thermocouple in each section of the kiln and cycle the power to each section on and off semi-independently as if it were an individual kiln. When you have have a 3 section kiln and the bottom section is firing a little cooler than the middle and and top section. With zone control turned on, the controller will turn off power to the middle and top sections until the bottom section has caught up and then turn the power to all 3 sections back on. This ensures that the temperature difference between the sections never gets too great.
Zone Control cannot be added later as it requires the changing of several internal compenents most notable because the kiln needs to have a minimum power rating known as 'the loss to watt ratio' in order for the kiln to keep up with the program when sections are turned off to balance the temperature.
Drawer floor to moved out electrically
only available with models:
Kiln as standard
Without ELS Door Opening to the Left
Exhaust air flap handle control.
Can only be operated with a TC507 or TC630 controller using additional switch outputs
Air supply and exhaust air flap handle control
For ELS range
Flexible exhaust air hose, 70mm dia,
Sold per metre
To connect to exhaust air socket
Hood for Chimney for ELS-S range of kilns
Socket to connect to chimney at back
Stainless Steel Exhaust Air Hood suitable for ELS1000S
Rohde Exhaust aiir hoods for electric frontloaders KE and ELS ranges
The robust stainless steel exhaust air hoolds cover the entire ceiling area of the frontloader absorbing exhaust air from the kiln. The ROHDE in-frame ventilated side walls direct the heat produced inside the kiln into the ceiling area. The exhaust air hood then absorbs and discharges it through a connected tube.
Exhaust air hoods can be connected to other pipes using a standardised socket. This should be done by a company specialising in ventilation and chimney systems.
Construction properties are perfectly matched to ROHDE Frontloaders allowing optimum removal of exhaust air, e.g. for Paperclay applications.
Cooling System for ELS 750S to 1000S
Fan to be controlled from kiln controller - only available if combined with air supply and exhaust air flap handle control and ST 630 controller.