Rohde KE-150 N Pottery Kiln From  £6043.20


Hover Over Image To Zoom+
View Larger Image

Frontloaders KE-N Series

Rohde Frontloaders form the KE-N series comprise of six models with kiln volumes between 100 and 480 litres.  The heating elements are recessed into grooved firebricks on all five wall sides.

The KE-N series has been designed for use in workshops and schools.  The heating elements in this series have been recessed into grooved bricks.  This results in a variety of advantages.  The heating elements are protected while the kiln is being charged, power output is constant and heat is evenly distributed throughout the firing chamber, providing the best possible results.

Special Features of the KE-N Series:

  • 5-side heating resulting in even heat distribution
  • Heating elements recessed into grooved brick
  • Stainless steel in-frame ventilation resulting in low external temperatures and corrosion protection
  • 3-layer insulation structure
  • R-SiC ceiling support “ System ROHDE” prevents cracks and particles falling from the ceiling onto the ware
  • Adjustable door hinge, easy dismounting of door for transport.

 

Specifications on Kiln

Model                                            KE-150 N

Max Temp                                     1300oC

Internal Dimensions (mm)           W-460 x D-480 x H-680

External Dimensions (mm)          W-800 x D-1050 x H-1780

Output                                           9kW

Supply                                          13Amps

Connector                                    CEE 16 A

Kiln Shelf Size(mm)                     W-440 x D-400

Weight                                           375kg


PLEASE ALLOW 4-6 WEEKS FOR DELIVERY



1 - Choose Controller
CHOOSE OPTION
Bentrup Controller TC 304

Clearly structured control unit and easy to operate, for use in workshops, schools and hobby rooms.

  • 5 firing programs, freely adjustable
  • Delayed start programmable
  • 1 dwell/soak time freely programmable

 

Stafford Instruments Controller ST 410

Clearly structured control unit and easy to operate, for use in workshops, schools and hobby rooms.•

  • 16 programs each with up to 32 segments
  • 1 controlled heating / cooling ramp + soak per segment
  • Soak peiods up to 99 hours 59 mins
  • Ramp rates from 1 to 999°/ hour + FULL
  • Ideal for glass or ceramics use
  • Programs can be altered while firing
  • Program pause and advance facilities
  • Keyboard lockable
  • Delayed start facility – up to 99 hours 59 mins
  • Power failure recovery
  • Energy used display
  • Setpoint display
  • Alarm buzzer & alarm output
  • °C/°F operation
  • USB interface for datalogging
  • Show firing curves with ROHDEgraph. ROHDEgraph is free software for the visualisation and archiving of firing curves. Firing data can be automatically written to a USB device by ROHDE ST Series controllers (ST 410 and ST 630) during firing. This firing data can then be displayed and saved on the PC as a firing curve via the ROHDEgraph software. This requires a PC with Windows and a current version of Microsoft Excel.
Stafford Instruments Controller ST 630

Clearly structured control unit and easy to operate, for use in workshops, schools and hobby rooms.•

  • 3-zone controller
  • 32 programs each with up to 32 segments
  • 1 controlled heating / cooling ramp + soak per segment
  • Soak peiods up to 99 hours 59 mins
  • Ramp rates from 1 to 999°/ hour + FULL
  • Ideal for glass or ceramics use
  • Programs can be altered while firing
  • Program pause and advance facilities
  • Keyboard lockable
  • Delayed start facility – up to 99 hours 59 mins
  • Power failure recovery
  • Energy used display
  • Setpoint display
  • Alarm buzzer & alarm output
  • °C/°F operation
  • Programmable event (optional)*
  • USB interface for datalogging
  • Show firing curves with ROHDEgraph.  ROHDEgraph is free software for the visualisation and archiving of firing curves. Firing data can be automatically written to a USB device by ROHDE ST Series controllers (ST 410 and ST 630) during firing. This firing data can then be displayed and saved on the PC as a firing curve via the ROHDEgraph software. This requires a PC with Windows and a current version of Microsoft Excel.
Stafford Instruments ROHDE ST 215 Kiln Controller

Temperature Programmer


• 10 programs

• Up to 16 segments per program

• 1 controlled heating / cooling ramp + 1 soak per segment

• Ideal for glass or ceramics use

• Soak times up to 99hr 59min

• Ramp rates from 1 to 999°/hour + FULL

• Programs can be reviewed or altered while firing

• Program Pause & Segment Advance facilities

• Keyboard lockable

• Delayed start facility - up to 99hr 59min

• Power failure recovery

• Energy used display

• Worldwide operation

• °C/°F switchable display

• Standard alarm / safety relay with alarm buzzer FEATURES

2 - Select Phase
CHOOSE OPTION
3 - View port in door to monitor firing
CHOOSE OPTION
Rohde View port in door to monitor firing
View port in door to monitor firing
Rohde Without view port in door to monitor firing
Without view port in door to monitor firing
4 - Door Opening to the Left
CHOOSE OPTION
Rohde Door opening to the left (controller right)
Door opening to the left - controller will be on the right side
Rohde Standard Door Opening
Standard Door Opening to right - controller on the left
5 - Exhaust Air Flap Handle Control
CHOOSE OPTION
Rohde Exhaust Air Flap Handle Control for KE-B

Exhaust air flap handle control.

Can only be operated with a TC507 or TC630 controller using additional switch outputs

Rohde Without Exhaust air flap control
Without Exhaust air flap control
6 - KE Air supply & exhaust air flap handle control
CHOOSE OPTION
Rohde Air supply and exhaust air flap handle control

Air supply and exhaust air flap handle control

For KE-Frontloading series only 

Can only be operated with a TC507 or TC630 controller using additional switch outputs

Rohde Without Air supply and exhaust air flap handle control
Without Air supply and exhaust air flap handle control
7 - Forklift Loading Frame For KE Series
CHOOSE OPTION
Rohde Forklift Loading Frame For frontloading kilns up to 480ltr
Forklift Loading Frame For Rohde frontloading kilns up to 480ltr
Rohde Without Forklift Loading Frame For KE Series
Without Forklift Loading Frame For KE Series
8 - Flexible exhaust air hose per mtr
CHOOSE OPTION
Quantity
Rohde Flexible Exhaust air hose per metre

Flexible exhaust air hose, 70mm dia,

Sold per metre

To connect to exhaust air socket 

Rohde Without Flexible Exhaust air hose
Without flexible exhaust air hose
9 - Hood for Chimney
CHOOSE OPTION
Rohde Hood for chimney

Hood for chimney

Dia - 150mm

socket to connect chimney at the back

Rohde Without Hood for Chimney
Without Hood for Chimney
10 - Stainless Steel Exhaust Air Hood KE100N & KE150N
CHOOSE OPTION
Rohde Stainless Steel Exhaust Air Hood KE-100N & KE-150N

Stainless steel exhaust air hood suitable for KE-100N and KE-150N

 

Rohde Exhaust aiir hoods for electric frontloaders KE and ELS ranges

The robust stainless steel exhaust air hoolds cover the entire ceiling area of the frontloader absorbing exhaust air from the kiln.  The ROHDE in-frame  ventilated side walls direct the heat produced inside the kiln into the ceiling area.  The exhaust air hood then absorbs and discharges it through a connected tube.  

 

Exhaust air hoods can be connected to other pipes using a standardised socket.  This should be done by a company specialising in ventilation and chimney systems.

 

Construction properties are perfectly matched to ROHDE Frontloaders allowing optimum removal of exhaust air, e.g. for Paperclay applications.

Rohde Without Stainless Steel Exhaust Air Hood

Rohde Exhaust aiir hoods for electric frontloaders KE and ELS ranges

The robust stainless steel exhaust air hoolds cover the entire ceiling area of the frontloader absorbing exhaust air from the kiln.  The ROHDE in-frame  ventilated side walls direct the heat produced inside the kiln into the ceiling area.  The exhaust air hood then absorbs and discharges it through a connected tube.  

 

Exhaust air hoods can be connected to other pipes using a standardised socket.  This should be done by a company specialising in ventilation and chimney systems.

 

Construction properties are perfectly matched to ROHDE Frontloaders allowing optimum removal of exhaust air, e.g. for Paperclay applications.

11 - Drying Rack for frontloading kiln
CHOOSE OPTION
Rohde Drying Rack for Frontloading Kiln

Drying Rack for frontloaders

3 Shelves 

Not available for KE-35B, KE-65B or KE-65B eco

Rohde Without Drying Rack for Frontloading kiln
Without drying rack for frontloading kiln
12 - With Kiln Furniture Set 7
CHOOSE OPTION
Quantity
Rohde With Kiln Furniture Set 7
With Rohde Kiln furniture set consisting of the following
  • 3 x 440mm x 400mm kiln shelves
  • 6 x 25mm props
  • 6 x 50mm props
  • 6 x 75mm props
  • 6 x 100mm props
Rohde Without Furniture Set
Standard equipment without Rohde Kiln furniture set