How the Scarva Earthstone ES70 Architectural Body Clay was born.
Our most popular clay loved by all.
We have the biggest and brightest selection of coloured decorating slips available on the market today.
See our best selling Raw Materials.
See our range of finished Glazed products.
Dragon Leadfree Glaze and Slip Stains.
See our best selling Stains and Colours.
Top selling underglaze brands Amaco, Nano Colours, Spectrum and more
See our best selling Underglaze Pencils & Crayons.
See our range of tools, equipment and resources.
See our range of wall extruders and accessories.
Everything in this section is reduced to clear. Grab a bargain! While stocks last!
Frontloaders KE-N Series
Rohde Frontloaders form the KE-N series comprise of six models with kiln volumes between 100 and 480 litres. The heating elements are recessed into grooved firebricks on all five wall sides.
The KE-N series has been designed for use in workshops and schools. The heating elements in this series have been recessed into grooved bricks. This results in a variety of advantages. The heating elements are protected while the kiln is being charged, power output is constant and heat is evenly distributed throughout the firing chamber, providing the best possible results.
Special Features of the KE-N Series:
Specifications on Kiln
Model KE-480 N
Max Temp 1300oC
Internal Dimensions (mm) W-640 x D-770 x H-980
External Dimensions (mm) W-980 x D-1340 x H-1830
Connector CEE 32 A
Kiln Shelf Size(mm) W-600 x D-360 (2)
PLEASE ALLOW 4-6 WEEKS FOR DELIVERY
Clearly structured control unit and easy to operate, for use in workshops, schools and hobby rooms.
Clearly structured control unit and easy to operate, for use in workshops, schools and hobby rooms.•
• 10 programs
• Up to 16 segments per program
• 1 controlled heating / cooling ramp + 1 soak per segment
• Ideal for glass or ceramics use
• Soak times up to 99hr 59min
• Ramp rates from 1 to 999°/hour + FULL
• Programs can be reviewed or altered while firing
• Program Pause & Segment Advance facilities
• Keyboard lockable
• Delayed start facility - up to 99hr 59min
• Power failure recovery
• Energy used display
• Worldwide operation
• °C/°F switchable display
• Standard alarm / safety relay with alarm buzzer FEATURES
3 Zone Control Option for ROHDE model Kilns - Can only be added as an option when ordering a NEW kiln.
3 Zone Control option INCLUDES Controller ST 630 (do not change the Controller Option to ST630 - leave as default controller option)
Zone Control kilns have a thermocouple in each section of the kiln and cycle the power to each section on and off semi-independently as if it were an individual kiln. When you have have a 3 section kiln and the bottom section is firing a little cooler than the middle and and top section. With zone control turned on, the controller will turn off power to the middle and top sections until the bottom section has caught up and then turn the power to all 3 sections back on. This ensures that the temperature difference between the sections never gets too great.
Zone Control cannot be added later as it requires the changing of several internal compenents most notable because the kiln needs to have a minimum power rating known as 'the loss to watt ratio' in order for the kiln to keep up with the program when sections are turned off to balance the temperature.
Exhaust air flap handle control.
Can only be operated with a TC507 or TC630 controller using additional switch outputs
Air supply and exhaust air flap handle control
For KE-Frontloading series only
Drying Rack for frontloaders
Not available for KE-35B, KE-65B or KE-65B eco
Stainless Steel Exhaust Air Hood For KE330N & KE480N
Rohde Exhaust aiir hoods for electric frontloaders KE and ELS ranges
The robust stainless steel exhaust air hoolds cover the entire ceiling area of the frontloader absorbing exhaust air from the kiln. The ROHDE in-frame ventilated side walls direct the heat produced inside the kiln into the ceiling area. The exhaust air hood then absorbs and discharges it through a connected tube.
Exhaust air hoods can be connected to other pipes using a standardised socket. This should be done by a company specialising in ventilation and chimney systems.
Construction properties are perfectly matched to ROHDE Frontloaders allowing optimum removal of exhaust air, e.g. for Paperclay applications.
Hood for chimney
Dia - 150mm
socket to connect chimney at the back
Flexible exhaust air hose, 70mm dia,
Sold per metre
To connect to exhaust air socket