The TE 165 S Toploader has a volume of 165 litres and is a kiln from the TE-S series suitable for temperatures to 1320°C.
ROHDE Toploaders from the TE-S series are high-quality kilns for everyday use in professional ceramic workshops. The kilns in this series have been continually developed by ROHDE over the last three decades. Toploaders from the TE-S series guarantee state-of-the-art technology and are characterised by outstanding durability.
Many ceramic workshops appreciate the flexibility and extendability of some models and use this feature to increase the economic efficiency of their firing capacities to obtain the best possible results. Besides an extensive range of technical features and high-quality workmanship, ROHDE Toploaders from the TE-S series offer particular technical features, such as:
Extendability (not TE 168 S)
The kiln volume of four models from the ROHDE Toploader TE-S series can be increased up to 50% by simply fitting in a heatable additional extension ring (ZWR).
TE 80 S to 100 litres volume
TE 95 S to 145 litres volume
TE 130 S to 200 litres volume
TE 165 S to 250 litres volume
Floor heating
Models of the TE-S series from TE 95 S upwards are equipped with a standard heatable kiln floor. The additional heating provides an even temperature distribution in particular in the lower and middle temperature ranges.
Special models with low connected load (only TE 168 S)
The TE 84 S, TE 98 S, TE 134 S and TE 168 S models are slightly different from the other models in the TE-S series. Technically, these four models are based on the smaller basic models with 80, 95, 130 and 165 litres. Their design features such as the dimensions, the insulation structure, the fl oor heating or the cover construction are identical.
In contrast to the basic models, however, these models cannot be subsequently expanded with an extension ring. This allows an even distribution of the connected load since no power has to be kept free for a later extension ring. The entire output of the kiln can, therefore, be evenly distributed over three phases. This permits up to 15 % lower connected load – compared to the basic TE-S series model.
The TE 84 S, TE 98 S, TE 134 S and TE 168 S models are just as powerful as the basic models and can be used at the same application and maximum temperatures.
