|Home PageNano Antique Stoneware Crackle GlazesScarva Nano Colours NAK001 Brilliant White Stoneware Crackle Glaze||
Scarva Nano Colours NAK001 Brilliant White Stoneware Crackle Glaze From £8.01
New for 2015 is our fantastic new range of Scarva Nano Antique Stoneware Crackle Glazes. Developed in the Scarva laboratory these beautiful glazes are perfect for creating an antique crackle effect.
This range of 12 glazes create a glossy opaque finish with a fine crackle. Depending on which stoneware clay body is used, results in the size and spacing of the crackle can vary slightly.
If using the glaze in brush on form we recommend applying 3-4 coats allowing adequate drying time between each application. To further intensify the crackle we would suggest leaving the fired piece for at least 48 hours to allow the crackle effect to develop. To highlight the effect you can rub Scarva Crackle Intensifying Ink to the surface, leave for approximately 5 minutes and rub off excess.
For more interesting effects there are different colours of ink available to compliment or contrast the glaze colour.
Nano Antique Crackles use no lead in their manufacture and are therefore ideal for the classroom and studio. All 12 colours are available in both powder and brush on form
For best results fire between 1260-1300°C or Orton Cones 8 –10 with a 20 minute soak
Firing range: 1260-1300°
Crackle glazes are not suitable for food use
There are 1 reviews with an average rating of 5.00
Anton from United KingdomOwner12 May 2019 16:41
This was a replacement for a product that Scarva don't seem to stock anymore. However, it's even better! It gives a lovely fine crackle which is about the same size as the enlarged photo.
Seen a lower price elsewhere? We will do our best to match any price request, simply click the button below or give our sales team a call on 028 4066 9699 and we'll check it out for you