|
|
| Home PageNano Porcelain Crackle GlazesScarva Nano Colours NPK007 Seafoam Green Porcelain Crackle Glaze |
|
1/1
Scarva Nano Colours NPK007 Seafoam Green Porcelain Crackle Glaze
Ireland's No.1 Pottery Supplies Fully Tracked Orders With GLS & An Post Express Checkout with  
Another new addition to the Scarva catalgoue is the beautiful range of Porcelain Crackle Glazes. These glazes were delveloped in the Scarva lab after ever increasing demand for crackle glazes especially for Porcelain bodies. They are available in both powder and brush-on and we recommend 2-3 coats. After firing the crackle should be given time to develop, usually around 48 hours is a good estimate. To further enhance the crackle, Indian ink or very strong tea can be applied over the glaze to highlight the crazing. Please be aware that due to the nature of crackle glazes they are not suitable for use on dinnerware.
Filter
Sort By
Beautiful
A beautiful glaze with a slight crackle to create an interesting surface. The glaze has a tendency to settle and harden in the bucket but this was easily solved by Brendan’s suggestion of adding Calcium chloride
Anonymous
United Kingdom
06 December 2021
Helpful?
(14)
(0)
Seen a lower price elsewhere? We will do our best to match any price request, simply click the button below or give our sales team a call on 028 4066 9699 and we'll check it out for you
Hi Scarva team, could you please share what should be the firing scheme in order to achieve the desired result displayed on the picture.
Thanks,
Milena
Milena from United Kingdom
Hi, 100 degC/hour to Orton cone 8 (on most controllers this is 1220-1230) with a 10 minute soak. Hope this helps.
Scarva Team
Our Best Selling Scarva Nano Colours Nano Porcelain Crackle GlazesAlso BoughtOur Best Selling Scarva Nano Colours Products |
