Dorothea
desde
United Kingdom
asks
How deep is the 14 inch GRP043 hump mould?
Respuestas de Scarva:
|
Hi, it has a depth of 16mm. Hope this helps.
|
Sue
desde
United Kingdom
asks
Are the sides of the round form vertical? ( slightly slanted)
Respuestas de Scarva:
|
Hi, the sides are all angled to allow the form to release from the clay. Hope this helps!
|
Joanna
desde
United Kingdom
asks
Is the measurement the smaller or larger diameter of the mould?
Respuestas de Scarva:
|
Hi there.
Form sizes are measured from the back side of the Form which is also the largest part of the Form. Measurements are approximate.
If you are trying to determine what size to make, there are many factors involved. Factors would include: The size of your lip, shrinkage of clay and firing temperature.
The Depth of Standard Forms are 3/4 inch. If you want to determine the center/inside measurement, it would be 1.5 inches smaller than the Form measurements.
Hope this helps.
|