Pottery Crafts Ceramaster P5233 505Ltr From  £12860.00


1/1
  • Select image
Pottery Crafts Ceramaster P5233 505Ltr

P5233 SPECIFICATIONS


Firing capacity: 505 litres (17.8 cu ft).
Maximum Temperature: 1320°C (Cone 11)
Chamber dimensions: 610mm wide x 840mm deep x 980mm high (24” x 33” x 38½”).
External dimensions: 1020mm wide x 1280mm deep x 1800mm high (40½” x 50½” x 71”)
Weight: 600kg
Power: 26.5 kW.
Supply required: 3 phase-45 amps per phase
Kiln Furniture Set: See below:

This set is for the Ceramaster 505lt P5233 Kiln.
12 - P5486 Batts 410 x 280 x 15mm
18 - P5518 Props 50 mm
18 - P5519 Props 100mm
18 - P5520 Props 150mm
18 - P5521 Props 200mm
50 - P5551 Stilts (02)
50 - P5552 Stilts (03)
50 - P5554 Stilts (05)
50 - P5555 Stilts (06)
Batt Wash 2kg


Controller included: CERA-5 or select CERA10+  for marginal extra cost.


Additional Safety Equipment available for kilns(Links Below):

Heatlock: PFL Heatlock 
Auto-damper: PFL/AD


Information Link: Kiln Safety & Ventilation pages
Link: Guide to Programming Your Kiln

Key Features


Constructed from low thermal mass insulation brick with two high grade backup insulation boards, the roof is a traditional curved arch construction again with two layers of backup insulation, enclosed within a 2mm zintec steel powder coated frame.
Graded Kanthal A1 Heating Elements are supported on ceramic tubes, positioned in the floor and two side walls.
Dual contactors provide security against over-fires, when used in conjunction with Potterycrafts Kiln controllers.
Block construction flat arched roof for greater strength and durability.
Designed for repeated high temperature firings to 1320°C (cone 11).
  • Type R thermocouples fitted as standard on UK kilns.
  • Adjustable clasp door locks fitted.
  • Brick to brick door seal, no messy fibre.
  • All kilns are fitted with a Harting socket for easy controller connection.
  • Roof and door vent as standard for venting of the kiln during firing and to aid cooling.
  • Standard left hand door hinges with option for right hand.
  • 2 Zone controller option available, please request this at time of purchase.
    Three year warranty (excluding wear parts) back-up from our staff and a network of independent service engineers.
    Technical staff available for advice on all aspects of using your kiln.
    Made in Britain at our factory in Stoke-on-Trent.
    CE certified.
  • DELIVERY

  • This kiln is made to order, delivery will be confirmed after ordering

    .
    All kilns are subject to specification change at any time


1 - Furniture Set for P5233
ELIJA UNA OPCIÓN
Cantidad
Pottery Crafts Furniture Set for P5233
12 - P5486 Batts 410 x 280 x 15mm
18 - P5518 Props 50 mm
18 - P5519 Props 100mm 
18 - P5520 Props 150mm 
18 - P5521 Props 200mm 
50 - P5551 Stilts (02)
50 - P5552 Stilts (03) 
50 - P5554 Stilts (05) 
50 - P5555 Stilts (06) 
Batt Wash 2kg
Pottery Crafts Without Furniture for F/L kilns
Without Furniture for F/L kilns
2 - CERA-10+ Controller for Ceramaster
ELIJA UNA OPCIÓN
Pottery Crafts CERA-10+ Controller for Ceramaster

CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.

 

CERA-10 has 10 programs each with 10 segments. Delay start and program pause. Each segment has a heating/cooling ramp, a target temperature and a soak. This controller is ideal for firings where a range of programs are frequently used.

It can be used for any firing requiring close control over multiple heating and cooling ramps such as macro crystalglazes and for glass slumping and fusing.
Pottery Crafts Without CERA-10 Controller
kiln without CERA-10, as standard with CERA-5
3 - Heatlock
ELIJA UNA OPCIÓN
Pottery Crafts Heatlock

PFL/HL HeatLock 

The Heatlock keeps the kiln door locked until the kiln has cooled to a safe temperature preventing damage to kiln door and eliminating risk of burning. The lock is discretely positioned adjacent to the interlock key under the door of our front loading kilns; it is operated by a small controller pre-set to lock at 60°C in the heating cycle and to unlock at 55°C on cooling. A warning light indicates when the door is locked, when the light goes out it is safe to open the kiln. The HeatLock is failsafe, if the power is turned off it remains locked, the door can only be opened when powered up and the temperature has dropped to 55°C.
Pottery Crafts Without Heatlock
Without Heatlock
4 - Auto Damper
ELIJA UNA OPCIÓN
Pottery Crafts Auto Damper

PFL/AD Auto-damper

The damper is pre-set to close when the kiln temperature reaches 550°C, it opens again when the kiln cools down to 200°C. There is no need to set the opening and closing temperature and no complicated controller as the temperatures are factory pre-set. The auto-damper eliminates the need to come back to the kiln during firing and removes the risk of the flue remaining open throughout the firing creating a potential hazard.
Pottery Crafts Without Auto Damper
Without Auto Damper