Pottery Crafts Heatworker P5943 180Ltr From  £6260.00


1/1
  • Select image
Pottery Crafts Heatworker P5943 180Ltr

P5943 SPECIFICATIONS


Firing capacity: 180 litres (6.36 cu ft)
Maximum Temperature: 1320°C
Chamber dimensions mm: 420 wide x 580 deep x 740 high.
External dimensions mm: 730 wide x 1042 deep x 1580 high.
Weight: 315kg
Power: 9.0 kW
Supply required: Single Phase - 40 amps or 3 phase - 15 amps per phase.
Kiln Shelf size: 500 x 380 x 15mm - 1 batt per layer.
Kiln Furniture Set: See below:

This set is for the Heatworker 180lt Kiln , P5943
4 - P5485 BATTS 500 x 380mm
8 - P5518 PROPS 50mm
8 - P5519 PROPS 100mm
8 - P5521 PROPS 200mm
1 - P3380-01 BATT WASH (1Kg)

Standard Controller : CERA-5 (5 program memory each with 5 segments) or CERA-10+ (10 program memory each with 16 segments) for marginal extra cost, select your choice from the drop down box above.
Additional Safety Equipment available for kilns(Links Below):
Ventilation Hood: KM202
Heatlock; PFL/ Heatlock 
Auto-damper; PFL/AD
Information Link: Kiln Safety & Ventilation pages
Link: Guide to Programming Your Kiln Guide to programming your kiln

Key Features


Graded heating elements are supported on ceramic tubes in the walls and floor for efficient use of electricity.
Constructed from low thermal mass insulation brick with high grade backup insulation boards.
Powder coated 2mm zintec steel frame with rust resistant stainless steel architrave above the door.
Brick to brick door seal, no messy fibre.
Standard left hand door hinges with cost option for right hand.
Door Spy Hole/vent and roof vent with damper.
Over-fire protection in conjunction with Potterycrafts controllers.
Designed for repeated high temperature firings to 1320°C (cone 11).
Three year warranty (excluding wear parts).
Back-up from our staff and network of independent service engineers.
Technical advice available on all aspects of using your kiln.
Potterycrafts Kilns are Made in Stoke-on-Trent, our skilled staff can call on over a 100 years accumulated knowledge of kiln building.
 

DELIVERY

 

This kiln is made to order, delivery TBC when ordering.


All kilns are subject to specification change at any time


1 - Select Phase
ELIJA UNA OPCIÓN
Pottery Crafts Single Phase
Single Phase power supply
Pottery Crafts Three Phase
Three Phase power supply
2 - Furniture Set for P5943
ELIJA UNA OPCIÓN
Cantidad
Pottery Crafts Furniture Set for P5943
4 - P5485 BATTS 500 x 380mm
8 - P5518 PROPS 50mm
8 - P5519 PROPS 100mm
8 - P5521 PROPS 200mm
1 - P3380-01 BATT WASH (1Kg)
Pottery Crafts Without Furniture for F/L kilns
Without Furniture for F/L kilns
3 - CERA-10+ Controller for Heatworker
ELIJA UNA OPCIÓN
Pottery Crafts CERA-10+ Controller for Heatworker

CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.

 

CERA-10 has 10 programs each with 10 segments. Delay start and program pause. Each segment has a heating/cooling ramp, a target temperature and a soak. This controller is ideal for firings where a range of programs are frequently used.

It can be used for any firing requiring close control over multiple heating and cooling ramps such as macro crystalglazes and for glass slumping and fusing.
Pottery Crafts Wihtout CERA-10+ Controller
Kiln as standard with CERA-5 Controller
4 - Ventilation Hood for P5943 / C150 / P5119
ELIJA UNA OPCIÓN
Pottery Crafts Ventilation Hood for P5943 / C150 / P5119

KM202 Zintec Hood for P5943, C150 Heatworker Kilns and P5119 Lightmaster Kiln.

 

The ventilation hood is designed to remove the excess heat from the kiln area.
It is positioned directly above the kiln and so it removes the air directly from around the kiln, as well as fumes from the flue, keeping the kiln area cooler.
The hood has a 150mm diameter spigot on top for connection to customers’ exhaust ducting.
We recommendconnecting the spigot directly to the room extraction system or to an exhaust fan to prevent leakage of fumes into thekiln room. 
No electrical connections are required.

 

Ventilation Hood & Mounting Brackets
Pottery Crafts Without Ventilation Hood
Without Ventilation Hood
5 - Heatlock
ELIJA UNA OPCIÓN
Pottery Crafts Heatlock

PFL/HL HeatLock 

The Heatlock keeps the kiln door locked until the kiln has cooled to a safe temperature preventing damage to kiln door and eliminating risk of burning. The lock is discretely positioned adjacent to the interlock key under the door of our front loading kilns; it is operated by a small controller pre-set to lock at 60°C in the heating cycle and to unlock at 55°C on cooling. A warning light indicates when the door is locked, when the light goes out it is safe to open the kiln. The HeatLock is failsafe, if the power is turned off it remains locked, the door can only be opened when powered up and the temperature has dropped to 55°C.
Pottery Crafts Without Heatlock
Without Heatlock
6 - Auto Damper
ELIJA UNA OPCIÓN
Pottery Crafts Auto Damper

PFL/AD Auto-damper

The damper is pre-set to close when the kiln temperature reaches 550°C, it opens again when the kiln cools down to 200°C. There is no need to set the opening and closing temperature and no complicated controller as the temperatures are factory pre-set. The auto-damper eliminates the need to come back to the kiln during firing and removes the risk of the flue remaining open throughout the firing creating a potential hazard.
Pottery Crafts Without Auto Damper
Without Auto Damper