Pottery Crafts Topworker P59960 450Ltr From  £6860.00


1/1
  • Select image
Pottery Crafts Topworker P59960 450Ltr

The New P59960 is Potterycrafts Topworker Professional Oval Top Loading kilns made in our Stoke-on-Trent factory, with a capacity of 450 litres (16.1 cu/ft) this model of kiln is ideal for professional studios and schools and colleges working on a medium to large scale.

 

Key Features


The Side walls are low thermal mass 23 Grade 76mm thick bubble insulation brick with a 25mm backup insulation giving 101mm of insulation. 
Outer jacket is stainless steel with adjustable tensioning clamps to enable the kiln to always be kept ridged throughout its lifetime. 
The kiln lid is also low thermal mass 23 Grade 76mm thick backed up with 12.5mm of high grade fibre board giving a lid thickness of 88.5mm. 
The lid top has a powder coated steel cover plate. 
Gas struts make opening the kiln effortless. 
The lid hinge allows the lid to move freely reducing the risk cracking during the firing. 
The kiln floor 108mm of super-efficient Ultralite granular insulation normally found in industrial kilns. 
Three support bricks are located in the base to enable a shelf/batt to be placed above the insulation.

 

P59960 SPECIFICATIONS


Firing Capacity: 450 litres (15.7 cu/ft)
Maximum Temperature: 1300°C (Cone 10)
Chamber Dimensions: 1060mm wide x 780mm deep x 690mm high
External Dimensions: 1300mm wide x 1270mm deep x 1140mm high
Weight: 275Kg 
Power:18.8 kW 
Supply Required Single Phase (Amps): N/A 
Supply Required 3 Phase (Amps): 30A 


Kiln Furniture Set Available: Not included in price of kiln

 

4 - P5440 - 585 x 345mm RECTANGULAR BATT
8 - P5466 - 585mm SEMI-CIRCULAR BATT
27 - P5520 150mm Tubular Prop 
1 - P3380-01 BATT WASH (1Kg)


Controller included: CERA-2 (2-program memory each with 3 segments)

You can upgrade to CERA-5 , CERA-10 or CERA-10+for marginal extra cost.

 

Kiln is made to order, delivery approx 4-6 weeks (this will be confirmed when ordering)


1 - Furniture Set for P59960
ELIJA UNA OPCIÓN
Cantidad
Pottery Crafts Furniture Set for P59960

Furniture Set for P59960

 

4 - P5440 - 585 x 345mm RECTANGULAR BATT
8 - P5466 - 585mm SEMI-CIRCULAR BATT
27 - P5520 150mm Tubular Prop 
1 - P3380-01 BATT WASH (1Kg)
Pottery Crafts Without Furniture for Potterycrafts kiln
Kiln as standard without any kiln furniture
2 - CERA-5 Controller for Topworker
ELIJA UNA OPCIÓN
Pottery Crafts CERA-5 Controller for Topworker

Suitable for Topworker 150ltr up to 450ltr

 

CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.

 

CERA-5+ has 5 programs each with delay start, 5 heating/cooling ramps, soak, cut off and program pause.

 

This controller gives the benefit multiple heating and cooling ramps for pottery firing where usually two programs are used, having five ramps allows for several heating and/or cooling phases in the program.
Pottery Crafts Without CERA-5 Controller
Without CERA-5 controller, you will need to choose the upgrade to CERA-10+ controller
3 - CERA-10+ Controller for Topworker
ELIJA UNA OPCIÓN
Pottery Crafts CERA-10+ Controller for Topworker

Suitable for Topworkers 150ltr to 450ltr

 

CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.

 

CERA-10 has 10 programs each with 10 segments. Delay start and program pause. Each segment has a heating/cooling ramp, a target temperature and a soak. This controller is ideal for firings where a range of programs are frequently used.

It can be used for any firing requiring close control over multiple heating and cooling ramps such as macro crystalglazes and for glass slumping and fusing.
Pottery Crafts Without CERA-10 + Controller
Without CERA-10 + Controller, kiln as standard with CERA-5