1/1
  • Select image
Rohde ELS 200 N Pottery Kiln

Rohde ELS 200 N Pottery Kiln

1 - Choose your Controller
Rohde Kiln as standard with ST310 Controller
Kiln as standard with ST310 Stafford Controller

Clear and extremely easy-to-operate control unit for use in workshops, schools and hobbies.

32 programs with 2 segments
2 controlled heating ramps / 1 controlled cooling ramp + soak per segment
Soak periods up to 99 hours 59 mins
Ramp rates from 1 to 999°/ hour + FULL
USB interface and Wifi module to evaluate and save data with ROHDEgraph and ROHDE myKiln App
Ideal for eramics use
Programs can be altered while firing
Program pause and advance facilities
Keyboard lockable
Delayed start facility – up to 99 hours 59 mins
Power failure recovery
Energy used display
Setpoint display
Alarm buzzer
°C/°F operation
USB interface for data logging
Rohde Upgrade to ST411 Stafford Controller
Upgrade to ST411 Controller

Clear and extremely easy-to-operate control unit for use in workshops, schools and hobbies.

32 programs each with up to 32 segments
1 controlled heating / cooling ramp + soak per segment
1 Programmable event
Soak periods up to 99 hours 59 mins
Ramp rates from 1 to 999°/ hour + FULL
Ideal for glass or ceramics use
Programs can be altered while firing
Program pause and advance facilities
Keyboard lockable
Delayed start facility – up to 99 hours 59 mins
Power failure recovery
Energy used display
Setpoint display
Alarm buzzer
°C/°F operation
USB interface for data logging
USB interface and Wifi module to evaluate and save data with ROHDEgraph and ROHDEapp
2 - View port in door to monitor firing
Rohde View port in door to monitor firing
View port in door to monitor firing
Rohde Without view port in door to monitor firing
Without view port in door to monitor firing
3 - ELS Door Opening to the Left
Rohde ELS Door Opening to the Left
ELS Door Opening to the Left (controller right)
Rohde Without ELS Door Opening to the Left

Kiln as standard 

 

Without ELS Door Opening to the Left 
4 - Exhaust Air Flap Handle Control for ELS range
Rohde Exhaust Air Flap Handle Control for ELS range

Exhaust Air Flap Handle Control for ELS range 

Can only be operated with a TC507 or TC630 controller using additional switch outputs 
Rohde Without Exhaust air flap control
Without Exhaust air flap control
5 - Flexible exhaust air hose per mtr
Rohde Flexible Exhaust air hose per metre

Flexible exhaust air hose, 70mm dia,

Sold per metre

To connect to exhaust air socket 
Rohde Without Flexible Exhaust air hose
Without flexible exhaust air hose
6 - Hood for Chimney
Rohde Hood for chimney

Hood for chimney

Dia - 150mm

socket to connect chimney at the back
Rohde Without Hood for Chimney
Without Hood for Chimney
7 - Stainless Steel Exhaust Air Hood ELS210B 200N
Rohde Stainless Steel Exhaust Air Hood ELS210B 200N

Stainless Steel Exhaust Air Hood suitable for ELS210B and ELS200N

 

Rohde Exhaust aiir hoods for electric frontloaders KE and ELS ranges

 

The robust stainless steel exhaust air hoolds cover the entire ceiling area of the frontloader absorbing exhaust air from the kiln.  The ROHDE in-frame  ventilated side walls direct the heat produced inside the kiln into the ceiling area.  The exhaust air hood then absorbs and discharges it through a connected tube.  

 

Exhaust air hoods can be connected to other pipes using a standardised socket.  This should be done by a company specialising in ventilation and chimney systems.

 

Construction properties are perfectly matched to ROHDE Frontloaders allowing optimum removal of exhaust air, e.g. for Paperclay applications.
Rohde Without Stainless Steel Exhaust Air Hood

Rohde Exhaust aiir hoods for electric frontloaders KE and ELS ranges

The robust stainless steel exhaust air hoolds cover the entire ceiling area of the frontloader absorbing exhaust air from the kiln.  The ROHDE in-frame  ventilated side walls direct the heat produced inside the kiln into the ceiling area.  The exhaust air hood then absorbs and discharges it through a connected tube.  

 

Exhaust air hoods can be connected to other pipes using a standardised socket.  This should be done by a company specialising in ventilation and chimney systems.

 

Construction properties are perfectly matched to ROHDE Frontloaders allowing optimum removal of exhaust air, e.g. for Paperclay applications.
8 - Kiln Furniture
Rohde With Kiln Furniture Set 17
With Rohde Kiln furniture set consisting of the following
  • 4 x 560mm x 400mm kiln shelves
  • 9 x 25mm props
  • 9 x 50mm props
  • 9 x 75mm props
  • 9 x 100mm props
Rohde Without Furniture Set
Standard equipment without Rohde Kiln furniture set
£11957.46
£0.00
£11957.46
Añadir a la lista de favoritos
See All Rohde Frontloaders ELS-N series 1300°C | See All Rohde Products
Postage to United Kingdom on this item starts at £95.00

Trustpilot

UK's No.1 Pottery Supplies

Fully Tracked Orders

Express Checkout with

 

 

Frontloaders ELS Ergo Load System ELS-N series

ROHDE Frontloaders with Ergo Load System from the ELS-N series comprise two models with kiln volumes between 150 and 200 litres. The heating elements are recessed into new grooved fi rebricks on all fi ve wall sides. The new, robust groove geometry provides the best possible protection for heating elements when the kiln is being charged. Constant power output ensures that heat is evenly distributed throughout the fi ring chamber to provide the best possible results.

The ELS-N series has been designed for use in workshops and schools. A 16-Ampere power connection allows kiln operation using a standard high-voltage socket (CEE 16 A). The high-quality

3-layer insulation structure allows for maximum fi ring temperatures of 1300°C.

  • 5-side heating resulting in even heat distribution
  • Heating elements recessed in protected position into new grooved bricks
  • Stainless steel in-frame ventilation resulting in low external temperatures and corrosion protection
  • 3-layer insulation structure
  • R-SiC ceiling support “System ROHDE” prevents cracks and particles falling from the ceiling onto the ware
  • Kiln inclusive of controller TC304 or ST215

 

Specifications on Kiln

 

Model                                            ELS 200 N

Max Temp                                     1300oC

Internal Dimensions (mm)           W-460 x D-620 x H-680

External Dimensions (mm)          W-800 x D-1240 x H-1730

Output                                           11kW

Supply                                          16Amps

Connector                                    CEE 16 A

Kiln Shelf Size(mm)                     W-560 x D-400

Weight                                           510kg


PLEASE ALLOW 4-6 WEEKS FOR DELIVERY

Review this Product
Be the first to review this product
Rohde ELS 200 N Pottery Kiln

Got a question about this product? We'll do our best to get you the information you need, simply click below.
Rohde ELS 200 N Pottery Kiln

Our Best Selling Rohde Frontloaders ELS-N series 1300°C

También comprado

Our Best Selling Rohde Products