Rohde ELS-750 S Pottery Kiln - email for quotation From  £0.00


1/1
  • Select image
Rohde ELS-750 S Pottery Kiln - email for quotation

Email: sales@scarva.com for quotation 

Frontloaders ELS series Ergo Load System ELS-S

ROHDE Frontloaders with Ergo Load System from the ELS-S series comprise six models with kiln volumes between 150 and 1000 litres. The heating elements are mounted on support rods. 5-side heating provides even distribution of heat in each performance range.

Frontloaders from the ELS-S series were designed for daily use over many years in professional workshops at fi ring temperatures up to 1320°C. In addition, they meet highest requirements for everyday applications in schools.

  • 5-side heating, resulting in even heat distribution
  • Heating elements mounted on support rods
  • Stainless steel in-frame ventilation resulting in low external temperatures and corrosion protection
  • 3-layer insulation structure
  • R-SiC ceiling support “System ROHDE” prevents cracks and particles falling from the ceiling onto the ware

 

The ELS 150 S Frontloader with Ergo Load System has a volume of 150 litres and is a kiln from the ELS-S series suitable for temperatures to 1320°C.

 

Specifications on Kiln

 

Model                                                 ELS-750 S

Max Temp                                         1320oC

Internal Dimensions (mm)               W-720 x D-1100 x H-1080

External Dimensions (mm)              W-1510 x D-1730 x H-1970

Output                                                50.0kW

Supply                                                73 Amps

Connector                                          ----

Kiln Shelf Size(mm)                          W-480 x D-330 (2)

Weight                                                1350kg

 

Kiln is supplied with TC304 or ST215 Controller 

 

Additional switch cabinet on the left side

 


PLEASE ALLOW 4-6 WEEKS FOR DELIVERY


1 - Choose Controller
ELIJA UNA OPCIÓN
Stafford Instruments ST411 Kiln Controller

Temperature Programmer

  • 32 programs each with up to 32 segments
  • 1 controlled heating / cooling ramp + soak per segment
  • 1 Programmable event
  • Soak periods up to 99 hours 59 mins
  • Ramp rates from 1 to 999°/ hour + FULL
  • Ideal for glass or ceramics use
  • Programs can be altered while firing
  • Program pause and advance facilities
  • Keyboard lockable
  • Delayed start facility – up to 99 hours 59 mins
  • Power failure recovery
  • Energy used display
  • Setpoint display
  • Alarm buzzer
  • °C/°F operation
  • USB interface for data logging
  • USB interface and Wifi module to evaluate and save data with ROHDEgraph and ROHDEapp

 
2 - 3 Zone Control incl. controller ST630
ELIJA UNA OPCIÓN
Rohde 3 Zone Control

3 Zone Control Option for ROHDE model Kilns - Can only be added as an option when ordering a NEW kiln.

3 Zone Control option INCLUDES Controller ST 630 (do not change the Controller Option to ST630 - leave as default controller option)

How Does Zone Control Work

Zone Control kilns have a thermocouple in each section of the kiln and cycle the power to each section on and off semi-independently as if it were an individual kiln. When you have have a 3 section kiln and the bottom section is firing a little cooler than the middle and and top section. With zone control turned on, the controller will turn off power to the middle and top sections until the bottom section has caught up and then turn the power to all 3 sections back on. This ensures that the temperature difference between the sections never gets too great.

Zone Control cannot be added later as it requires the changing of several internal compenents most notable because the kiln needs to have a minimum power rating known as 'the loss to watt ratio' in order for the kiln to keep up with the program when sections are turned off to balance the temperature.
Rohde Without 3 Zone Control

3 Zone Control Option for ROHDE model Kilns - Can only be added as an option when ordering a NEW kiln.
3 - View port in door to monitor firing
ELIJA UNA OPCIÓN
Rohde View port in door to monitor firing
View port in door to monitor firing
Rohde Without view port in door to monitor firing
Without view port in door to monitor firing
4 - ELS Door Opening to the Left
ELIJA UNA OPCIÓN
Rohde ELS Door Opening to the Left
ELS Door Opening to the Left (controller right)
Rohde Without ELS Door Opening to the Left

Kiln as standard 

 

Without ELS Door Opening to the Left 
5 - Exhaust Air Flap Handle Control for ELS range
ELIJA UNA OPCIÓN
Rohde Exhaust Air Flap Handle Control for ELS range

Exhaust Air Flap Handle Control for ELS range 

Can only be operated with a TC507 or TC630 controller using additional switch outputs 
Rohde Without Exhaust air flap control
Without Exhaust air flap control
6 - Air supply and exhaust air flap handle control ELS
ELIJA UNA OPCIÓN
Rohde ELS Air supply and exhaust air flap handle control

Air supply and exhaust air flap handle control

For ELS range 

Can only be operated with a TC507 or TC630 controller using additional switch outputs
Rohde Without Air supply and exhaust air flap handle control
Without Air supply and exhaust air flap handle control
7 - Flexible exhaust air hose per mtr
ELIJA UNA OPCIÓN
Cantidad
Rohde Flexible Exhaust air hose per metre

Flexible exhaust air hose, 70mm dia,

Sold per metre

To connect to exhaust air socket 
Rohde Without Flexible Exhaust air hose
Without flexible exhaust air hose
8 - Hood For Chimney for ELS-S
ELIJA UNA OPCIÓN
Rohde Hood For Chimney for ELS-S

Hood for Chimney for ELS-S range of kilns 

150mm dia

Socket to connect to chimney at back
Rohde Without Hood For Chimney for ELS-S
Without Hood For Chimney for ELS-S
9 - Stainless Steel Exhaust Air Hood ELS750S
ELIJA UNA OPCIÓN
Rohde Stainless Steel Exhaust Air Hood ELS750S
Stainless Steel Exhaust Air HoodSuitable for  ELS750S
Rohde Without Stainless Steel Exhaust Air Hood

Rohde Exhaust aiir hoods for electric frontloaders KE and ELS ranges

The robust stainless steel exhaust air hoolds cover the entire ceiling area of the frontloader absorbing exhaust air from the kiln.  The ROHDE in-frame  ventilated side walls direct the heat produced inside the kiln into the ceiling area.  The exhaust air hood then absorbs and discharges it through a connected tube.  

 

Exhaust air hoods can be connected to other pipes using a standardised socket.  This should be done by a company specialising in ventilation and chimney systems.

 

Construction properties are perfectly matched to ROHDE Frontloaders allowing optimum removal of exhaust air, e.g. for Paperclay applications.
10 - Cooling System for ELS 750S to 1000S
ELIJA UNA OPCIÓN
Rohde Cooling System for ELS 750S to 1000S

Cooling System for ELS 750S to 1000S

 

Fan to be controlled from kiln controller - only available if combined with air supply and exhaust air flap handle control and ST 630 controller.
Rohde Without Cooling System for ELS 750S to 1000S
Without Cooling System for ELS 750S to 1000S
11 - With Kiln Furniture Set 22
ELIJA UNA OPCIÓN
Cantidad
Rohde With Kiln Furniture Set 22
With Rohde Kiln furniture set consisting of the following
  • 5 x 480mm x 330mm kiln shelves (4 per layer)
  • 24 x 25mm props
  • 24 x 50mm props
  • 24 x 75mm props
  • 24 x 100mm props
Rohde Without Furniture Set
Standard equipment without Rohde Kiln furniture set
12 - Electric Drawer Floor ELS-S
ELIJA UNA OPCIÓN
Rohde Electric Drawer Floor ELS-S

Drawer floor to moved out electrically 

only available with models:

ELS-330S

ELS-480S

ELS-750S

ELS-1000S

 
Rohde Without Electric Drawer Floor ELS-S
Without Electric Drawer Floor ELS-S