Rohde KE-480S Front Loading Kiln From  £19100.72


1 - Select Phase
ELIJA UNA OPCIÓN
2 - Choose your Controller
ELIJA UNA OPCIÓN
Rohde Kiln as standard with ST310 Controller
Kiln as standard with ST310 Stafford Controller

Clear and extremely easy-to-operate control unit for use in workshops, schools and hobbies.

32 programs with 2 segments
2 controlled heating ramps / 1 controlled cooling ramp + soak per segment
Soak periods up to 99 hours 59 mins
Ramp rates from 1 to 999°/ hour + FULL
USB interface and Wifi module to evaluate and save data with ROHDEgraph and ROHDE myKiln App
Ideal for eramics use
Programs can be altered while firing
Program pause and advance facilities
Keyboard lockable
Delayed start facility – up to 99 hours 59 mins
Power failure recovery
Energy used display
Setpoint display
Alarm buzzer
°C/°F operation
USB interface for data logging
Rohde Upgrade to ST411 Stafford Controller
Upgrade to ST411 Controller

Clear and extremely easy-to-operate control unit for use in workshops, schools and hobbies.

32 programs each with up to 32 segments
1 controlled heating / cooling ramp + soak per segment
1 Programmable event
Soak periods up to 99 hours 59 mins
Ramp rates from 1 to 999°/ hour + FULL
Ideal for glass or ceramics use
Programs can be altered while firing
Program pause and advance facilities
Keyboard lockable
Delayed start facility – up to 99 hours 59 mins
Power failure recovery
Energy used display
Setpoint display
Alarm buzzer
°C/°F operation
USB interface for data logging
USB interface and Wifi module to evaluate and save data with ROHDEgraph and ROHDEapp
3 - View port in door to monitor firing
ELIJA UNA OPCIÓN
Rohde View port in door to monitor firing
View port in door to monitor firing
Rohde Without view port in door to monitor firing
Without view port in door to monitor firing
4 - Door Opening to the Left
ELIJA UNA OPCIÓN
Rohde Door opening to the left (controller right)
Door opening to the left - controller will be on the right side
Rohde Standard Door Opening
Standard Door Opening to right - controller on the left
5 - Exhaust Air Flap Handle Control
ELIJA UNA OPCIÓN
Rohde Exhaust Air Flap Handle Control for KE-B

Exhaust air flap handle control.

Can only be operated with a TC507 or TC630 controller using additional switch outputs

Rohde Without Exhaust air flap control
Without Exhaust air flap control
6 - KE Air supply & exhaust air flap handle control
ELIJA UNA OPCIÓN
Rohde Air supply and exhaust air flap handle control

Air supply and exhaust air flap handle control

For KE-Frontloading series only 

Can only be operated with a TC507 or TC630 controller using additional switch outputs

Rohde Without Air supply and exhaust air flap handle control
Without Air supply and exhaust air flap handle control
7 - Flexible exhaust air hose per mtr
ELIJA UNA OPCIÓN
Cantidad
Rohde Flexible Exhaust air hose per metre

Flexible exhaust air hose, 70mm dia,

Sold per metre

To connect to exhaust air socket 

Rohde Without Flexible Exhaust air hose
Without flexible exhaust air hose
8 - Hood for Chimney
ELIJA UNA OPCIÓN
Rohde Hood for chimney

Hood for chimney

Dia - 150mm

socket to connect chimney at the back

Rohde Without Hood for Chimney
Without Hood for Chimney
9 - Stainless Steel Exhaust Air Hood KE-330S & KE-480S
ELIJA UNA OPCIÓN
Rohde Stainless Steel Exhaust Air Hood KE-330S & KE-480S
Stainless Steel Exhaust Air Hood KE-330S & KE-480S
Rohde Without Stainless Steel Exhaust Air Hood

Rohde Exhaust aiir hoods for electric frontloaders KE and ELS ranges

The robust stainless steel exhaust air hoolds cover the entire ceiling area of the frontloader absorbing exhaust air from the kiln.  The ROHDE in-frame  ventilated side walls direct the heat produced inside the kiln into the ceiling area.  The exhaust air hood then absorbs and discharges it through a connected tube.  

 

Exhaust air hoods can be connected to other pipes using a standardised socket.  This should be done by a company specialising in ventilation and chimney systems.

 

Construction properties are perfectly matched to ROHDE Frontloaders allowing optimum removal of exhaust air, e.g. for Paperclay applications.

10 - Drying Rack for frontloading kiln
ELIJA UNA OPCIÓN
Rohde Drying Rack for Frontloading Kiln

Drying Rack for frontloaders

3 Shelves 

Not available for KE-35B, KE-65B or KE-65B eco

Rohde Without Drying Rack for Frontloading kiln
Without drying rack for frontloading kiln
11 - Kiln Furniture
ELIJA UNA OPCIÓN
Cantidad
Rohde With Kiln Furniture Set 20
With Rohde Kiln furniture set consisting of the following
  • 5 x 580mm x 350mm kiln shelves (2 per layer)
  • 18 x 25mm props
  • 18 x 50mm props
  • 18 x 75mm props
  • 18 x 100mm props
Rohde Without Furniture Set
Standard equipment without Rohde Kiln furniture set
12 - Forklift Loading Frame For KE Series
ELIJA UNA OPCIÓN
Rohde Forklift Loading Frame For frontloading kilns up to 480ltr
Forklift Loading Frame For Rohde frontloading kilns up to 480ltr
Rohde Without Forklift Loading Frame For KE Series
Without Forklift Loading Frame For KE Series
13 - 3 Zone Control incl. controller ST630
ELIJA UNA OPCIÓN
Rohde 3 Zone Control

3 Zone Control Option for ROHDE model Kilns - Can only be added as an option when ordering a NEW kiln.

3 Zone Control option INCLUDES Controller ST 630 (do not change the Controller Option to ST630 - leave as default controller option)

How Does Zone Control Work

Zone Control kilns have a thermocouple in each section of the kiln and cycle the power to each section on and off semi-independently as if it were an individual kiln. When you have have a 3 section kiln and the bottom section is firing a little cooler than the middle and and top section. With zone control turned on, the controller will turn off power to the middle and top sections until the bottom section has caught up and then turn the power to all 3 sections back on. This ensures that the temperature difference between the sections never gets too great.

Zone Control cannot be added later as it requires the changing of several internal compenents most notable because the kiln needs to have a minimum power rating known as 'the loss to watt ratio' in order for the kiln to keep up with the program when sections are turned off to balance the temperature.

Rohde Without 3 Zone Control

3 Zone Control Option for ROHDE model Kilns - Can only be added as an option when ordering a NEW kiln.


  • Description
  • Technical Data
  • Features
  • Reseñas
  • Q&A
Rohde LogoThe KE 480 S Frontloader has a volume of 480 litres and is a kiln from the KE-S series suitable for temperatures to 1320°C.

ROHDE Frontloaders from the KE-S series comprise nine models with kiln volumes between 100 and 1000 litres. The heating elements are mounted on support rods. 5-side heating provides even temperature distribution throughout every performance range.

The KE-S series was designed for daily use over many years in professional workshops at firing temperatures up to 1320°C. However, they are also suitable for everyday applications in schools, providing the best possible results.

Special features of the KE-S series:

5-side heating resulting in even heat distribution
Heating elements mounted on support rods
Stainless steel in-frame ventilation resulting in low external temperatures and corrosion protection
3-layer insulation structure
“System ROHDE”R-SiC ceiling support prevents cracks and particles falling from the ceiling onto the ware
Our Best Selling Rohde Frontloaders KE-S series 1320°C
Loading ...
Our Best Selling Rohde Products