Olivia
desde
United Kingdom
asks
Can these slips be mixed together to make different colours?
|
Respuestas de Scarva:
|
Yes they are ideal for mixing together to create endless combinations, hope this helps.
|
Natalie
desde
United Kingdom
asks
Can I colour the white decorating slip with mason stains?
|
Respuestas de Scarva:
|
Yes however I would recommend using our HFC High Firing Stains or Nano Colour Stains as I have found you achieve a stronger colour response.
|
Chris
desde
United Kingdom
asks
Can I apply the slip right down to the base of the pot, or will the slip then stick to the kiln shelf? Thanks Chris
|
Respuestas de Scarva:
|
Decorating slips are similar to a clay body and can be applied all over a piece, they will not melt enough to stick to the kiln shelf, hope this helps.
|
Kim
desde
United Kingdom
asks
Is the white slip actually white so that you can see what colour you will get if you add a coloured stain?
|
Respuestas de Scarva:
|
Yes it fires white, it is cream in colour before it is fired.
|
Marina
desde
Luxembourg
asks
Can I apply the slip with a brush?
|
Respuestas de Scarva:
|
Yes it can be applied with a brush or slip trailer.
|
Anne
desde
United Kingdom
asks
What is the main difference between Scarva decorating slip and Nano decorating slip?
|
Respuestas de Scarva:
|
Hi, they are formulated with different ingredients. Hope this helps!
|
Lizzy
desde
United Kingdom
asks
If I want to create more relief with design, how can I thicken the pre-made slip? Is there anything I can add?
|
Respuestas de Scarva:
|
Hi, the best way to thicken the slip would be to dehydrate it rather than through adding anything. Take some and place it in a conatiner and leave exposed to the air for a while, give it a stir every now and again until you've got the consistency you need. Hope this helps!
|
Florence
desde
United Kingdom
asks
Are your decorating slip ( mallard green, teal orange, white, black) lead free?
Thanks
|
Respuestas de Scarva:
|
Hi, yes all our slips are lead free. Hope this helps!
|
Sally
desde
United Kingdom
asks
Can this slip be used for mocha diffusion?
|
Respuestas de Scarva:
|
Hi, yes this could be used. Hope this helps!
|
Philippa
desde
United Kingdom
asks
Can I use underglazes on top of a white slip?
|
Respuestas de Scarva:
|
Yes you can!
|
Ginger
desde
United Kingdom
asks
Can this slip be used in slip cast moulds?
|
Respuestas de Scarva:
|
Hi, no, not really - you'd need to use casting slip that is set up specifically for casting. Hope this helps!
|
Sherrod
desde
United Kingdom
asks
Can the Scarva decorating slip be added to a piece already bisque fired? I want to brush a thin wash of this slip to my bisqued sculpture then cover with a matt white to fire to cone 6.
|
Respuestas de Scarva:
|
Its hard to say without testing first. Factors which will effect the outcome are the clay shrinkage, thickness applied and shape of the vessel. What you are trying to do is not common practice but please let us know how it turns out, Good luck!
|
Juliet
desde
United Kingdom
asks
Can these slips be used on low fire porcelain (^6)?
|
Respuestas de Scarva:
|
Yes you should have no issues with compatibility.
|
SCARVA Vivid Coloured Decorating Slips are coloured using our most intense stains. They are suitable for use on both Earthenware and Stoneware bodies. When manufacturing our slips we believe in using high percentages of stain to give strong, vivid colours throughout the range. The slip can be applied to leather hard clay with brushes, sponges or slip trailers. After biscuit firing the pots should be glazed with a suitable transparent glaze, which will further enhance the vibrant colours.
