Pagina principalPorcelain ClaysScarva FLAX Paper Clay ES600 PorcelainReseñas |
|
Jason desde United KingdomPropietario21 October 2012 15:06
Out of the bag a little sticky, easy to dry up to a good working consistency within a short time. This clay is very durable when fully dried and allows precise carving of very fine detail, which is exactly what I needed. I tried throwing it(not on a wheel, literally throwing a piece at a wall) and it only left a dent. Possibly a bit excessive, but a strength like this opens up a lot of possibilities.
181 Personas fuera 338 He encontrado esta reseña útil
Anonymous desde United KingdomPropietario28 December 2011 15:13
This is a great product compared to other fibre clays, making my work so much easier. The clay is consistently good, always very smooth, with a nice warm white colour and good translucency. It also keeps well, doesn't go mouldy as other paper clays and the packaging makes it very easy to handle. The only slightly negative aspect is that when newly delivered the clay can be quite wet and sticky.
247 Personas fuera 411 He encontrado esta reseña útil
Maria desde United KingdomPropietario26 November 2012 15:37
Paper has a tremendous green strength, can be force dried and it is easily mended when bone dry. It is also very easy to recycle. It responds very well to modelling and impression techniques, but is not good for throwing, carving or etching. The FLAX clay is better than all other paper clays I have tried and it does it not mould or rot easily.
153 Personas fuera 281 He encontrado esta reseña útil
Anonymous desde Denmark04 May 2021 19:09
Easy to work with and very versatile for handbuilding techniques. Unfortunately, I am currently having some warping issues that are quite visible in my bigger slab buit pieces, and I am still trying to find out if it is an issue of the clay, or my new workspace environment that causes this.
17 Personas fuera 31 He encontrado esta reseña útil
Millie desde United KingdomPropietario06 April 2021 13:20
This is a wonderful, strong yet delicate, porcelain clay. Great for hand building. If the clay is thin enough, it becomes translucent after high firing. I get great results with clear glaze.
19 Personas fuera 42 He encontrado esta reseña útil
Heather desde United KingdomPropietario06 August 2017 19:37
As said before very wet when first opened, lovely and smooth, light etc not ideal for me as I make a lot of pierced work and its not perfectly suited to this I feel as it doesnt always cut cleanly, prefer porcelain for this. Do think its great for sculpture though
30 Personas fuera 73 He encontrado esta reseña útil
Anonymous desde United Kingdom22 August 2022 13:04
Lovely clay to work with as described and it smells gorgeous. A pleasure to work with. Only thing is the first piece I made - a shallow wide dish shape for an upside down ceiling light - slumped badly. Because I wanted to glaze the rim and I wasn’t glazing inside I balanced the piece on 3 kiln stilts and it slumped and now looks like a 3 cornered hat. !! Absolutely no good for it’s purpose now. Very sad as loved working with it. I bisque fired to 1000 and then a medium Fast stoneware glaze to 1222. Small pieces also in same load with same clay seem fine. Could it have been because I raised it on stilts and maybe I should have used 4 instead 3 so the slump wasn’t so triangular? Comment welcome because I want to try again. I usually only use low fired clay and so Could I fire this clay lower to say 1040 which is my usually low firing top temp?
5 Personas fuera 13 He encontrado esta reseña útil
Maggie desde United KingdomPropietario17 June 2014 19:44
Very easy to use and versatile, I have thrown small items with it on the wheel. Great to recycle.
131 Personas fuera 246 He encontrado esta reseña útil
Jan desde Denmark13 September 2022 07:15
I used to think the ES600 was a nice product, but now the color is darker and the consistency is not the same as before, unfortunately. Yes I am disappointed and will stop buying it.
11 Personas fuera 20 He encontrado esta reseña útil
Mairi desde Ireland25 June 2024 09:27
This clay has always been 5 ☆ but the last two batches have been really wet making it difficult and annoying to work with. Slab rolling takes twice as long as I have to partially roll it then let it dry out a good 12 hours before I can finish rolling. Same applies for anything I use it for, I have to let it dry out first. The wetness of the clay also means that it opens up (cracking and crazing) when moving the slabs. I'm really, really hoping that this can please be rectified 🙏
3 Personas fuera 4 He encontrado esta reseña útil
Bernd desde United KingdomPropietario09 June 2019 16:21
Excellent for handbuilding, brilliant white.
29 Personas fuera 60 He encontrado esta reseña útil
Anonymous desde United Kingdom06 August 2017 14:06
On my 3rd bag of this clay does just what I want.
24 Personas fuera 59 He encontrado esta reseña útil
wendy desde United KingdomPropietario11 August 2019 14:55
Great delivery, clay good as always
26 Personas fuera 46 He encontrado esta reseña útil
Anonymous desde United Kingdom23 July 2017 16:04
Perfect clay, perfect delivery
26 Personas fuera 47 He encontrado esta reseña útil
Anonymous desde United KingdomPropietario21 May 2017 19:51
Brilliant for hand building.
25 Personas fuera 55 He encontrado esta reseña útil
Karen desde United Kingdom29 August 2021 22:59
Great service
14 Personas fuera 29 He encontrado esta reseña útil
Vicky desde United KingdomPropietario30 April 2017 15:20
Love this clay!
31 Personas fuera 53 He encontrado esta reseña útil
vicky desde United KingdomPropietario11 September 2016 11:34
So versatile!
75 Personas fuera 121 He encontrado esta reseña útil
VickyFa desde United KingdomPropietario10 August 2016 20:55
Brilliant stuff!
78 Personas fuera 142 He encontrado esta reseña útil
Anonymous desde United Kingdom06 October 2013 12:07
Fires beautifully! Strangely bobbly to work with initially.
140 Personas fuera 263 He encontrado esta reseña útil
|