Tilly
desde
United Kingdom
asks
Hi
What is the mix ratio with water for this product? Also how well will this fire over underglaze (applied at greenware stage) at 1240?
Cheers
|
Respuestas de Scarva:
|
Mix approximately 700-800mls of water to 1000grams of powder, then pass through a fine mesh sieve, adjust if necessary. This glaze is opaque so if you apply onto of an underglaze you may not see the colour very well underneath. It is also important to do a bisque fire before applying any glaze to get the best results. Hope this helps.
|
Zoe
desde
United Kingdom
asks
Hello,
Could you please tell me, is this glaze food safe?
Many thanks,
Zoe
|
Respuestas de Scarva:
|
f a glaze is food safe our not depends on several factors including the type of clay used, the firing temperature, the shape of the vessel, the thickness of glaze even the position of the vessel in the kiln can have an effect on the glaze. Ideally a food safe test would be carried out by a reputable body like British Ceram. In the case of the glaze mentioned it would most likely pass a food safe test providing it was fired on a suitable body like our ES5 Earthstone Original in an electric kiln and to the suggested firing temperature
|
Natascha
desde
United Kingdom
asks
Will this glaze also be matt when fired to cone 9?
Firing temperature is 1235.
Thanks
n
|
Respuestas de Scarva:
|
It will yes.
|
Fern
desde
United Kingdom
asks
What's the recipe of this glaze?
|
Respuestas de Scarva:
|
I am sorry I am unable to give you the recipes of individual glazes.
|
Tamsen
desde
United Kingdom
asks
Hi, the information says this glaze works well with stains but does it work over oxides? I want to achieve a greeny-turquoise matt colour and have done this before using black copper oxide with a "dry white" glaze. Will it work with this or do I need a lead based matt white glaze? Thank you.
|
Respuestas de Scarva:
|
Yes you can use this as a base to add oxides.
|
Celia
desde
United Kingdom
asks
Can I use on leatherhard low shrinkage clay?
|
Respuestas de Scarva:
|
I would not recommend using this on green unfired clay, for the best results apply to bisqueware. As long as the clay body has a high maturing temperature around 1260oC it should work fine.
|
Hannah O' Connell
desde
United Kingdom
asks
Can I add coloured stain to this to change the colour or will it affect the glaze
|
Respuestas de Scarva:
|
Yes you can add stain to this glaze because it is white this may dilute the colour so if you add a red stain for example it may fire more pink in tone.
|
Marie
desde
Germany
asks
Will this glaze fire with a more satin finish at higher temperature?
|
Respuestas de Scarva:
|
Hi, yes this will become slightly siklier as it's fired higher. Hope this helps!
|
Emily
desde
United Kingdom
asks
Is there a recommended gravity for this glaze?
|
Respuestas de Scarva:
|
I am sorry we do not have the specific gravity for any of our glazes.
|
Suitable for use on Stoneware clay bodies. Zinc-free white matt excellent for addition of stains.
