Ruth
desde
United Kingdom
asks
Is it ok to mix it all. I only have a 500gm bag. Will it keep ok?
|
Respuestas de Scarva:
|
Yes thats fine.
|
Nicola
desde
Ireland
asks
Hiya. How often would I paint it onto the shelves? Is it every glazed firing?
Thanks
|
Respuestas de Scarva:
|
Bat wash is applied to new kiln shelves around three coats each in the opposite direction to the last. This will be permanent and there is no need to apply each time. If the shelves get damaged with glaze runs or pools remove the drips and apply top up coats of bat wash as required. Hope this helps.
|
Rosita
desde
United Kingdom
asks
How much batt wash do I need to do my shelves etc for my kiln for its first firing. It recommends 3 coats . I have a top loading Rhode kiln.
|
Respuestas de Scarva:
|
Hard to estimate but the smallest quantity of 1 kilo should be enough to do several kiln shelves.
|
Sunday
desde
Italy
asks
Does this work the same as Alumina Hydrate RM1002 ?
|
Respuestas de Scarva:
|
Hi there, with batt wash you add water and brush onto the shelves. Alumina hydrate is just used in its powder form. We use Alumina Hydrate Granular RM1002G.
|
Harris
desde
United Kingdom
asks
Hi, once applying the bat wash what's the next steps? Do I have to fire the shelves first on their own or can I do the first fire (following bat wash application) along with pots ? If I need to fire the shelves alone first should i use the kiln props to just space the shelves out? Thanks
|
Respuestas de Scarva:
|
Hi, after applying you should fire the shelves with no ware in the kiln to set the wash. You can use props as normal to separate the shelves. Hope this helps!
|
Rob
desde
United Kingdom
asks
Hello,
Have you a recommended water/powder ratio to mix your batt wash, please?
Thank you.
|
Respuestas de Scarva:
|
Mix approximately 600-700mls of water to 1000grams of powder this should give a nice creamy consistency. Hope this helps.
|
