Aaron
desde
United Kingdom
asks
Is this the same sodium silicate & same type that can be used to created the crackling texture on the surface of ceramics?
|
Respuestas de Scarva:
|
Yes you can use this.
|
Neil
desde
United Kingdom
asks
Is 140Tw too thick to brush on to a just thrown pot intended to be stretched (once the sodium silicate has been dried)for a crackle finish. If so, can it be thinned with water before application to suit one's judgement of the surface moisture content or should 100TW be used?
|
Respuestas de Scarva:
|
Yes this may be used, you can thin with water if desired.
|
KASHMIRA PATEL
desde
United Kingdom
asks
Can I use this Sodium silicate to create some kind of a crater glaze.?? What else should I add to it, or can I brush on an existing glaze. Thank you
|
Respuestas de Scarva:
|
I think you may be confusing this product with another. Silicon carbide is most commonly used to create crater or volcanic glazes. Here is a link for you:
https://www.scarva.com/en/Scarva-Raw-Materials-Silicon-Carbide-220-Mesh-RM1050/m-139.aspx
|
Marina
desde
Malta
asks
Can a deflocculant be used to stop glaze powder from settling on the bottom of my dipping bucket please?
|
Respuestas de Scarva:
|
Hi there, we would recommend using Epsom salts - 1g per 1Kg of glaze.
|
Carol
desde
United Kingdom
asks
Hi,
What is the difference between the three 'grades' of sodium silicate; 140, 100, 75?
I have only ever used just plain sodium silicate with no other information on the label. I use it as an ingredient in Lana Wilson's Magic Water, which is the world's best slip (water, sodium silicate and soda ash).
Thanks and best regards,
Carol
|
Respuestas de Scarva:
|
The difference between the three grades are the concentration of sodium silicate. 75TW is like thin water, 100TW is like water and 140TW is similar consistency to treacle.
|
liz
desde
United Kingdom
asks
What is the difference between Dispex and Sodium Silicate?
Is it best to use Calcium Chloride to prevent a glaze from settling if so how much do I need to add?
|
Respuestas de Scarva:
|
Dispex is a mixture of sodium silicate and soda ash. Both Sodium silicate and dispex may be used to defloculate a casting slip depending on your recipe one or both may be used.
Calcium chloride is a powerful suspension agent and should be used sparingly we recommend 1gram per 1000grams of powdered glaze.
|
