Emma
desde
United Kingdom
asks
Hi, will the addition of this flux to stain powder mean that I can create a self glazing underglaze? And how much water do I add if any?
Thanks
|
Respuestas de Scarva:
|
No this will only make a stain into an underglaze, it will not be self glazing. Underglazes are usually brushed on therefore I would recommend mixing your underglaze powder with RM1074 Underglaze medium approximately 2 parts medium to 1 part underglaze powder, hope this helps.
|
Ruth
desde
Ireland
asks
Hello! Do I need a sieve for this mixture? Also, can I add different volumes of water to get different hues like with watercolours?
Thanks!
|
Respuestas de Scarva:
|
Yes I would advise using a sieve the help make the mixture all the same consistency, yes you can alter the amount to suit your needs, I would however recommend testing first to see if you are happy with the results. Hope this helps.
|
Katie
desde
United Kingdom
asks
For 25% would that be one part flux to three parts stain; or one part flux to four parts stain? Thank you.
|
Respuestas de Scarva:
|
One part flux to 3 parts stain so 25grams of flux and 75grams of stain will work well you can add slightly more or less if you wish.
|
Irene
desde
United Kingdom
asks
Must you use underglaze medium and water for a brush on underglaze. Or, can you use one or the other?
|
Respuestas de Scarva:
|
For brush on you would need to use underglaze medium, no water.
|
Israel
desde
Israel
asks
Does your underglaze flux contains lead or lead frit?
|
Respuestas de Scarva:
|
Hi,
No, none of our products contain lead.
Hope this helps!
|
James H
desde
United Kingdom
asks
Hi,
How do i go about making this into an Underglaze Medium? do i add water then add underglaze powder?
what are the instructions for this product?
Thanks
|
Respuestas de Scarva:
|
To use underglaze flux add between 25-33% to make a powdered stain into an underglaze powder. Then mix 1 part underglaze medium to 1 part underglaze powder to create a brushable underglaze colour.
|
Georgina
desde
United Kingdom
asks
If I make up the underglaze per your instructions can it be applied to both leather hard clay and biscuit ware. Also does it still need to be dipped in a clear glossy or matt glaze before final firing.
|
Respuestas de Scarva:
|
Yes the underglaze may be applied to greenware or bisqueware. You do not have to glaze however a transparent glaze will create a more intense colour while also providing a more functional, practical ceramic surface.
|
Lou
desde
United Kingdom
asks
Hi I have HT Borax Frit. Any reason why this won't work as the underglaze flux. I fire stoneware to 1220/hot cone 6. Thanks
|
Respuestas de Scarva:
|
Hi, without testing it would be very difficult to know. It's probably an experiment worth undertaking though!
|
Combine your stain, underglaze medium and underglaze flux and mix well then pass through a 100 mesh sieve to create your brushable underglaze.
