AMACO PC-4 Palladium From  £14.68

I am delighted with the results of my first firing with this glaze. I used it on top of a Birds Egg Green Matt glaze i.e. Dribbled it down the sides and it
was really successful. I had my Kiln full of glazed pots with a maximum
Recommended temperature of 1080C. This is much lower than the recomnended temperature for this glaze but nevertheless the result was very attractive.
I will use it again with different combinations. Highly recommended.

Good. Must pay attention in the brushing on because the mirror effect is obtained by a very high thickness of glaze and kiln 1240° C only because at 1000° C the effect is not obtainable.
The difficult on Amaco Metallic glazes, is, in my opinion, the wide variety in kiln temperatures, so you must trial a lots and decide for one only.

I was very disappointed that the warning label on potential harm to marine life was left out of the product description. As my studio happens to be right next to a river and I can't guarantee that the waste water lines don't have leaks (VERY old factory building), I would not have bought this product just in case, even though we have a sump to catch sediments, it won't stop what's soluble.
I did try a little of the glaze and the results were fantastic, especially on ab porcelain

I use this in combination with other glazes to get some amazing effects!
Highly recommend this. It is one of my favourite glazes.

Not a fan of this one at all. Seems very volatile. Doesn't work at all on black clay, can look rather dull on some items and only found it remotely successful when I applied 4 layers of it and fired at the higher end of it's range. was so excited by the photo... alas

I tried a thin line of this in some cups. I did 4 coats but it came out greenish brownish rather than shiny metallic after firing at around 1200

Not what I expected but will try again... maybe not fired to correct temp, More bronze than a silver colour... onwards and upwards

Lovely metallic shine! Quite runny, though.