Lauren
de
United Kingdom
asks
Can this be used on Polymer clay? If so - do I simply brush it on before or after baking?
|
Réponses de Scarva:
|
Hi, unfortunately not - ceramic glazes aren't suitable for polymer clay as they must be fired in a kiln. Polymer clay is unsuitable as it will not reach the temperatures required for a glaze to vitrify. Hope this helps!
|
Sara
de
Italy
asks
Can I fire this at 980 Celsius?
Thanks!
|
Réponses de Scarva:
|
Hi, this would need to be fired higher than 980°C - ideally above 1040°C
|
Kat
de
United Kingdom
asks
Can I fire it up to cone 6 (1200C)? Would the speckles run?
|
Réponses de Scarva:
|
I would not recommend firing this glaze so high it will most likely run of the vessel. Maximum firing temperature would be around 1080o-1100oC.
|
Alex
de
United Kingdom
asks
Can this glaze be brushed on? Thanks
|
Réponses de Scarva:
|
Hi, yes - this is a brush on glaze, all Botz glazes are brush-on.
Hope this helps!
|
alex
de
United Kingdom
asks
Hello, can this be used on stonewear clay if fired at the correct temperature? Thanks!
|
Réponses de Scarva:
|
Hi there, yes it can, but it will probably craze.
|
