Gas-Firing Chamber Kiln
Some firing processes or connecting conditions require a gas-fired chamber kiln. Fast heating times and unique firing results are strong reasons for using such equipment.
Equipped with powerful gas burners the chamber kilns NB 150 - NB 600 are suitable for creative applications. An automatic temperature regulation is included in the basic model. The controller starts controlling after the burner has been manually ignited by automatic switching the burner between high and low loads. The burners have been optimized to allow relatively precise control from 300 °C. Despite this, we still recommend drying the charge completely to avoid waste caused by rapid heating up in the lower temperature range. At the end of the program, the burners are automatically shut off.
- High-performance, atmospheric burners for operating with liquid petroleum gas (connected pressure 1.5 bar/20 mbar or 50 mbar) or natural gas (connected pressure 20 mbar or 50 mbar)
- Depending on the application, special positioning of the gas burners with flame guidance provides for optimal temperature uniformity
- Manual set-up of burner power and atmosphere (oxidizing or reducing)
- Gas fittings with flame control and safety valve in accordance with DVGW (German Technical and Scientific Association for Gas and Water)
- Multi-layer, reduction-proof insulation with light-weight refractory bricks and high-quality back-up insulation result in low gas consumption
- Rugged, self-supporting, vaulted arch construction
- Environment-friendly, long-life powder-coating of housing
- Dual shell housing
- Dual shell door with long-live sealing
- Door is adjustable
- Exhaust hood
- Base included in scope of delivery
- Comfortable charging height with base of 760 mm (NB 150, NB 300) and 600 mm (NB 400, NB 600)
- Defined application within the constraints of the operating instructions
Specifications on Kiln
Model NB 300
Tmax 1300oC
Inner Dimensions (mm) W-450 x D-700 x H-780
Outer Dimensions (mm) W-1315 x D-1570 x H-2200 (exhaust hood 470mm included)
Connected Load 40 kW
Electrical Connection 1-Phase
Weight 740kg
Controller - B500 supplied with kiln
No voltage supply necessary if kiln is manually operated
External dimensions vary when furnace is equipped with additional equipment
Exhaust hood is dismountable
GAS TYPE must be stated when ordering:
Propane Gas - Calorific value at least 28kWH/m3, no condensing in the pipeline
Natural Gas - 9,9kWh/m2
Connection Pressure - Max.500 mbar
Pressure at full load - Min. 45mbar at the connection port (lower pressure on request).
