Pottery Crafts Heatworker P5941 90Ltr From  £4960.00


1/1
  • Select image
Pottery Crafts Heatworker P5941 90Ltr

P5941 SPECIFICATIONS


Firing capacity: 90 litres (3.18 cu ft).
Maximum Temperature: 1320°C (Cone 10)
Chamber dimensions mm: 420 wide x 400 deep x 550 high
External dimensions mm: 730 wide x 860 deep x 1450 high
Weight: 240kg
Power: 6.0 kW
Supply required: Single Phase- 32 amps or 3 phase-10 amps per phase
Kiln Shelf size: 380 x 350 x 13mm  -  1 batt per layer
Kiln Furniture Set: See below for specifications:

This set is for the Heatworker 90lt Kiln P5941
3 - P5483 BATTS 380 x 350 x 13mm
9 - P5518 PROPS 50mm
9 - P5519 PROPS 100mm
9 - P5520 PROPS 150mm
1 - P3380-01 BATT WASH (1Kg)

Standard Controller : CERA-5 (5 Program memory each with 5 segments) or CERA-10+ (10 Program memoy each with 16 segments for marginal extra cost, select your choice from the drop down box above.
Additional Equipment available for kilns(Links Below):
Ventilation Hood: KM202
Heatlock; PFL/HL
Auto-damper; PFL/AD
Information Link: Kiln Safety & Ventilation pages
Link: Guide to Programming Your Kiln Guide to programming your kiln

Key Features


Graded heating elements are supported on ceramic tubes in the walls and floor for efficient use of electricity.
Constructed from low thermal mass insulation brick with high grade backup insulation boards.
Powder coated 2mm zintec steel frame with rust resistant stainless steel architrave above the door.
Brick to brick door seal, no messy fibre.
Standard left hand door hinges with cost option for right hand.
Door Spy Hole/vent and roof vent with damper.
Over-fire protection in conjunction with Potterycrafts controllers.
Designed for repeated high temperature firings to 1320°C (cone 11).
Three year warranty (excluding wear parts)
Back-up from our staff and network of independent service engineers.
Technical advice available on all aspects of using your kiln.
Potterycrafts Kilns are Made in Stoke-on-Trent.
 

DELIVERY

This kiln is made to order, delivery time TBC


All kilns are subject to specification change at any time


1 - Select Phase
CHOISISSEZ OPTION
Pottery Crafts Single Phase
Single Phase power supply
Pottery Crafts Three Phase
Three Phase power supply
2 - CERA-10+ Controller for Heatworker
CHOISISSEZ OPTION
Pottery Crafts CERA-10+ Controller for Heatworker

CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.

 

CERA-10 has 10 programs each with 10 segments. Delay start and program pause. Each segment has a heating/cooling ramp, a target temperature and a soak. This controller is ideal for firings where a range of programs are frequently used.

It can be used for any firing requiring close control over multiple heating and cooling ramps such as macro crystalglazes and for glass slumping and fusing.
Pottery Crafts Wihtout CERA-10+ Controller
Kiln as standard with CERA-5 Controller
3 - Furniture Set for P5941
CHOISISSEZ OPTION
Quantité
Pottery Crafts Furniture Set for P5941
3 - P5483 BATTS 380 x 350 x 13mm
9 - P5518 PROPS 50mm 
9 - P5519 PROPS 100mm
9 - P5520 PROPS 150mm 
1 - P3380-01 BATT WASH (1Kg)
Pottery Crafts Without Furniture for F/L kilns
Without Furniture for F/L kilns
4 - Ventilation Hood for P5941/P5117
CHOISISSEZ OPTION
Pottery Crafts Ventilation Hood for P5941/P5117

KM205 Zintec Hood for P5941 Heatworker and P5117 Lightmaster Kilns.

 

The ventilation hood is designed to remove the excess heat from the kiln area.
It is positioned directly above the kiln and so it removes the air directly from around the kiln, as well as fumes from the flue, keeping the kiln area cooler.
The hood has a 150mmdiameter spigot on top for connection to customers’ exhaust ducting.
We recommend connecting the spigotdirectly to the room extraction system or to an exhaust fan to prevent leakage of fumes into the kiln room. 
No electrical connections are required.

 

Ventilation Hood & Mounting Brackets
Pottery Crafts Without Ventilation Hood
Without Ventilation Hood
5 - Heatlock
CHOISISSEZ OPTION
Pottery Crafts Heatlock

PFL/HL HeatLock 

The Heatlock keeps the kiln door locked until the kiln has cooled to a safe temperature preventing damage to kiln door and eliminating risk of burning. The lock is discretely positioned adjacent to the interlock key under the door of our front loading kilns; it is operated by a small controller pre-set to lock at 60°C in the heating cycle and to unlock at 55°C on cooling. A warning light indicates when the door is locked, when the light goes out it is safe to open the kiln. The HeatLock is failsafe, if the power is turned off it remains locked, the door can only be opened when powered up and the temperature has dropped to 55°C.
Pottery Crafts Without Heatlock
Without Heatlock
6 - Auto Damper
CHOISISSEZ OPTION
Pottery Crafts Auto Damper

PFL/AD Auto-damper

The damper is pre-set to close when the kiln temperature reaches 550°C, it opens again when the kiln cools down to 200°C. There is no need to set the opening and closing temperature and no complicated controller as the temperatures are factory pre-set. The auto-damper eliminates the need to come back to the kiln during firing and removes the risk of the flue remaining open throughout the firing creating a potential hazard.
Pottery Crafts Without Auto Damper
Without Auto Damper