Pottery Crafts Topworker P59750 80Ltr From  £3060.00


1/1
  • Select image
Pottery Crafts Topworker P59750 80Ltr

The Potterycrafts Topworker Top Loading kilns are made in our Stoke-on-Trent factory, with a capacity of 80 litres (2.8 cu/ft) this model is ideal for professional studios and schools and colleges working on a medium to large scale.

P59750 SPECIFICATIONS


Firing Capacity: 79 litres (2.8 cu/ft).
Maximum Temperature: 1300°C (Cone 10).
Chamber Dimensions: 460mm wide x 460mm deep.
External Dimensions: 670mm wide x 890mm deep x 880mm high.
Weight: 88kg.
Power: 6.6 kW.
Supply Required Single Phase (Amps): 32A
Supply Required 3 Phase (Amps): 10A.
Kiln Furniture Set Available:

This set is for the kiln P59750 and contains:
2 - P5471 420mm CIRCULAR BATT
9 - P5525 25mm CASTELLATED PROP
6 - P5526 38mm CASTELLATED PROP
1 - P3380-01 BATT WASH (1Kg)


Standard Controller : CERA-5 (5-program memory each with 5 segments) ,or CERA-10+ (10 -program memory each with 16 segments) for marginal extra cost, select your choice from the drop down box above.
 

Key Features


The Side walls are low thermal mass 23 Grade 76mm thick bubble insulation brick with a 25mm backup insulation giving 101mm of insulation.
Outer jacket is stainless steel with adjustable tensioning clamps to enable the kiln to always be kept ridged throughout its lifetime.
The kiln lid is also low thermal mass 23 Grade 76mm thick backed up with 12.5mm of high grade fibre board giving a lid thickness of 88.5mm.
The lid top has a powder coated steel cover plate.
Gas struts make opening the kiln effortless.
The lid hinge allows the lid to move freely reducing the risk cracking during the firing.
The kiln floor 108mm of super-efficient Ultralite granular insulation normally found in industrial kilns.
Three support bricks are located in the base to enable a shelf/batt to be placed above the insulation.

All Potterycrafts kilns are ROHS and WEEE compliant.

 

Kiln is made to order, delivery TBC (will be confirmed when ordering)

 


1 - CERA-5 Controller for P59750
CHOISISSEZ OPTION
Pottery Crafts CERA-5 Controller for P59750

CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.

 

CERA-5+ has 5 programs each with delay start, 5 heating/cooling ramps, soak, cut off and program pause.

 

This controller gives the benefit multiple heating and cooling ramps for pottery firing where usually two programs are used, having five ramps allows for several heating and/or cooling phases in the program.
Pottery Crafts Without CERA-5 Controller
Without CERA-5 controller, you will need to choose the upgrade to CERA-10+ controller
2 - CERA-10+ Controller for P59750
CHOISISSEZ OPTION
Pottery Crafts CERA-10+ Controller for P59750

CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.

 

CERA-10 has 10 programs each with 10 segments. Delay start and program pause. Each segment has a heating/cooling ramp, a target temperature and a soak. This controller is ideal for firings where a range of programs are frequently used.

It can be used for any firing requiring close control over multiple heating and cooling ramps such as macro crystalglazes and for glass slumping and fusing.
Pottery Crafts Without CERA-10 + Controller
Without CERA-10 + Controller, kiln as standard with CERA-5
3 - Select Phase
CHOISISSEZ OPTION
Pottery Crafts Single Phase
Single Phase power supply
Pottery Crafts Three Phase
Three Phase power supply
4 - Furniture Set for P59750
CHOISISSEZ OPTION
Quantité
Pottery Crafts Furniture Set for P59750
2 - P5471 420mm CIRCULAR BATT
9 - P5525 25mm CASTELLATED PROP
6 - P5526 38mm CASTELLATED PROP
1 - P3380-01 BATT WASH (1Kg)
Pottery Crafts Without Extra Furniture Set

Without Extra Furniture Set

 

Kiln as standard with 1 Furniture Set