Rohde KE-480 N Pottery Kiln From  £17715.28


1/3
  • Select image
Rohde KE-480 N Pottery Kiln

Frontloaders KE-N Series

Rohde Frontloaders form the KE-N series comprise of six models with kiln volumes between 100 and 480 litres.  The heating elements are recessed into grooved firebricks on all five wall sides.

The KE-N series has been designed for use in workshops and schools.  The heating elements in this series have been recessed into grooved bricks.  This results in a variety of advantages.  The heating elements are protected while the kiln is being charged, power output is constant and heat is evenly distributed throughout the firing chamber, providing the best possible results.

Special Features of the KE-N Series:

  • 5-side heating resulting in even heat distribution
  • Heating elements recessed into grooved brick
  • Stainless steel in-frame ventilation resulting in low external temperatures and corrosion protection
  • 3-layer insulation structure
  • R-SiC ceiling support “ System ROHDE” prevents cracks and particles falling from the ceiling onto the ware
  • Adjustable door hinge, easy dismounting of door for transport.

 

Specifications on Kiln

Model                                            KE-480 N

Max Temp                                     1300oC

Internal Dimensions (mm)           W-640 x D-770 x H-980

External Dimensions (mm)          W-980 x D-1340 x H-1830

Output                                           22kW

Supply                                          32Amps

Connector                                    CEE 32 A

Kiln Shelf Size(mm)                     W-600 x D-360 (2)

Weight                                           641kg


PLEASE ALLOW 4-6 WEEKS FOR DELIVERY


1 - Choose your Controller
CHOISISSEZ OPTION
Rohde Kiln as standard with ST310 Controller
Kiln as standard with ST310 Stafford Controller

Clear and extremely easy-to-operate control unit for use in workshops, schools and hobbies.

32 programs with 2 segments
2 controlled heating ramps / 1 controlled cooling ramp + soak per segment
Soak periods up to 99 hours 59 mins
Ramp rates from 1 to 999°/ hour + FULL
USB interface and Wifi module to evaluate and save data with ROHDEgraph and ROHDE myKiln App
Ideal for eramics use
Programs can be altered while firing
Program pause and advance facilities
Keyboard lockable
Delayed start facility – up to 99 hours 59 mins
Power failure recovery
Energy used display
Setpoint display
Alarm buzzer
°C/°F operation
USB interface for data logging
Rohde Upgrade to ST411 Stafford Controller
Upgrade to ST411 Controller

Clear and extremely easy-to-operate control unit for use in workshops, schools and hobbies.

32 programs each with up to 32 segments
1 controlled heating / cooling ramp + soak per segment
1 Programmable event
Soak periods up to 99 hours 59 mins
Ramp rates from 1 to 999°/ hour + FULL
Ideal for glass or ceramics use
Programs can be altered while firing
Program pause and advance facilities
Keyboard lockable
Delayed start facility – up to 99 hours 59 mins
Power failure recovery
Energy used display
Setpoint display
Alarm buzzer
°C/°F operation
USB interface for data logging
USB interface and Wifi module to evaluate and save data with ROHDEgraph and ROHDEapp
2 - 3 Zone Control incl. controller ST630
CHOISISSEZ OPTION
Rohde 3 Zone Control

3 Zone Control Option for ROHDE model Kilns - Can only be added as an option when ordering a NEW kiln.

3 Zone Control option INCLUDES Controller ST 630 (do not change the Controller Option to ST630 - leave as default controller option)

How Does Zone Control Work

Zone Control kilns have a thermocouple in each section of the kiln and cycle the power to each section on and off semi-independently as if it were an individual kiln. When you have have a 3 section kiln and the bottom section is firing a little cooler than the middle and and top section. With zone control turned on, the controller will turn off power to the middle and top sections until the bottom section has caught up and then turn the power to all 3 sections back on. This ensures that the temperature difference between the sections never gets too great.

Zone Control cannot be added later as it requires the changing of several internal compenents most notable because the kiln needs to have a minimum power rating known as 'the loss to watt ratio' in order for the kiln to keep up with the program when sections are turned off to balance the temperature.
Rohde Without 3 Zone Control

3 Zone Control Option for ROHDE model Kilns - Can only be added as an option when ordering a NEW kiln.
3 - View port in door to monitor firing
CHOISISSEZ OPTION
Rohde View port in door to monitor firing
View port in door to monitor firing
Rohde Without view port in door to monitor firing
Without view port in door to monitor firing
4 - Door Opening to the Left
CHOISISSEZ OPTION
Rohde Door opening to the left (controller right)
Door opening to the left - controller will be on the right side
Rohde Standard Door Opening
Standard Door Opening to right - controller on the left
5 - Exhaust Air Flap Handle Control
CHOISISSEZ OPTION
Rohde Exhaust Air Flap Handle Control for KE-B

Exhaust air flap handle control.

Can only be operated with a TC507 or TC630 controller using additional switch outputs
Rohde Without Exhaust air flap control
Without Exhaust air flap control
6 - Forklift Loading Frame For KE Series
CHOISISSEZ OPTION
Rohde Forklift Loading Frame For frontloading kilns up to 480ltr
Forklift Loading Frame For Rohde frontloading kilns up to 480ltr
Rohde Without Forklift Loading Frame For KE Series
Without Forklift Loading Frame For KE Series
7 - KE Air supply & exhaust air flap handle control
CHOISISSEZ OPTION
Rohde Air supply and exhaust air flap handle control

Air supply and exhaust air flap handle control

For KE-Frontloading series only 

Can only be operated with a TC507 or TC630 controller using additional switch outputs
Rohde Without Air supply and exhaust air flap handle control
Without Air supply and exhaust air flap handle control
8 - Drying Rack for frontloading kiln
CHOISISSEZ OPTION
Rohde Drying Rack for Frontloading Kiln

Drying Rack for frontloaders

3 Shelves 

Not available for KE-35B, KE-65B or KE-65B eco
Rohde Without Drying Rack for Frontloading kiln
Without drying rack for frontloading kiln
9 - Stainless Steel Exhaust Air Hood For KE330N&KE480N
CHOISISSEZ OPTION
Rohde Stainless Steel Exhaust Air Hood For KE330N & KE480N

Stainless Steel Exhaust Air Hood For KE330N & KE480N

 

Rohde Exhaust aiir hoods for electric frontloaders KE and ELS ranges

The robust stainless steel exhaust air hoolds cover the entire ceiling area of the frontloader absorbing exhaust air from the kiln.  The ROHDE in-frame  ventilated side walls direct the heat produced inside the kiln into the ceiling area.  The exhaust air hood then absorbs and discharges it through a connected tube.  

 

Exhaust air hoods can be connected to other pipes using a standardised socket.  This should be done by a company specialising in ventilation and chimney systems.

 

Construction properties are perfectly matched to ROHDE Frontloaders allowing optimum removal of exhaust air, e.g. for Paperclay applications.
Rohde Without Stainless Steel Exhaust Air Hood

Rohde Exhaust aiir hoods for electric frontloaders KE and ELS ranges

The robust stainless steel exhaust air hoolds cover the entire ceiling area of the frontloader absorbing exhaust air from the kiln.  The ROHDE in-frame  ventilated side walls direct the heat produced inside the kiln into the ceiling area.  The exhaust air hood then absorbs and discharges it through a connected tube.  

 

Exhaust air hoods can be connected to other pipes using a standardised socket.  This should be done by a company specialising in ventilation and chimney systems.

 

Construction properties are perfectly matched to ROHDE Frontloaders allowing optimum removal of exhaust air, e.g. for Paperclay applications.
10 - Hood for Chimney
CHOISISSEZ OPTION
Rohde Hood for chimney

Hood for chimney

Dia - 150mm

socket to connect chimney at the back
Rohde Without Hood for Chimney
Without Hood for Chimney
11 - Flexible exhaust air hose per mtr
CHOISISSEZ OPTION
Quantité
Rohde Flexible Exhaust air hose per metre

Flexible exhaust air hose, 70mm dia,

Sold per metre

To connect to exhaust air socket 
Rohde Without Flexible Exhaust air hose
Without flexible exhaust air hose
12 - With Kiln Furniture Set 11
CHOISISSEZ OPTION
Quantité
Rohde With Kiln Furniture Set 11
With Rohde Kiln furniture set consisting of the following
  • 5 x 600mm x 360mm kiln shelves (2 shelves per layer)
  • 18 x 25mm props
  • 18 x 50mm props
  • 18 x 75mm props
  • 18 x 100mm props
Rohde Without Furniture Set
Standard equipment without Rohde Kiln furniture set