Ian
de
United Kingdom
asks
I have been using Amaco Velvet Underglaze on Bisque ware to decorate it and then dipping into a clear stoneware glaze to great affects (when high fire glaze firing). Will your Multi-Purpose Stoneware Transparent work for this treatment also?
|
Réponses de Scarva:
|
Yes it should give a similar result, hope this helps.
|
Vicki
de
United Kingdom
asks
Really a newbie....having always used a ready made brush on glaze I would like to have a bucket of dipping glaze. So is it just powder to water with no other additives required to make up a bucket. Will this then keep for subsequent dippings if kept with a lid on ??
|
Réponses de Scarva:
|
To make up a powdered glaze simply mix 1000grams of powder with approximately 700-800mls of water, pass through a fine mesh pottery sieve and adjust to a thin cream consistency this is then ready for dipping. It will keep for prolong periods however some glazes when left may settle so make sure to mix well before each use. Hope this helps.
|
Rhiannon
de
United Kingdom
asks
Can I use this glaze with oxides?
Thanks
|
Réponses de Scarva:
|
Yes, hope this helps.
|
Rachel
de
United Kingdom
asks
Is this a good base glaze to add oxides to make my own glazes?
|
Réponses de Scarva:
|
Yes it is excellent for this propose, hope this helps.
|
Anne
de
United Kingdom
asks
Is this glaze food safe? If I add oxides, would it still be food safe?
Thanks
|
Réponses de Scarva:
|
This glaze is lead free if it is food safe will depend on several factors including the clay body it is applied to, the thickness and the final firing temperature. By adding oxides you are in effect creating a new glaze so will need to be tested separately to confirm it is food safe. Food safety test are carried out by reputable firms like Lucideon.
|
Gay
de
United Kingdom
asks
Which mesh sieve would be best to use for this glaze?
|
Réponses de Scarva:
|
100 mesh is ideal.
|
Marilou
de
Germany
asks
I've been using this glaze as a base for stains to create colored glazes for a while now and I love it. The finish is very glossy and I sometime would like to tone it down a little...would you be able to suggest any additive that would help the finish become more satin?
|
Réponses de Scarva:
|
It is tricky trying to matting a glossy glaze like this but adding in around 10% china clay will have an effect, you could also lower the final firing temperature as well.
|
Nicole
de
United Kingdom
asks
Can this be used as a top glaze over the Smooth textured Crank clay?
|
Réponses de Scarva:
|
It can however it will craze due to not fitting the clay.
|
GJ
de
United Kingdom
asks
Can I water down the brush on version of this glaze to pour into narrow necked vessels.
|
Réponses de Scarva:
|
Its not ideal but if you have to yes you can.
|
TERESA
de
United Kingdom
asks
I am using terracotta and decorating slip that fires to 1300c, would I be able to use this glaze to bring out the full colour of the slip, as I cannot find a transparent glaze to fire to 1300c. Many thanks
|
Réponses de Scarva:
|
Yes this is possible however terracotta does not usually fire as high as 1300oC I would double check the firing range before firing just in case.
|
Mari
de
Germany
asks
Would this glaze be compatible when mixing with with Chrome-Tin Stains ?
|
Réponses de Scarva:
|
You would be best using our GZ2136 for this.
|
James
de
United Kingdom
asks
Which brush on transparent glaze is best for applying on top of spectrum underglazes (on bisque). I'm looking for a clear glaze that will cause the least running/smudging of the underglaze.
Thank you
|
Réponses de Scarva:
|
This glaze is perfect and will work well.
|
Craig
de
United Kingdom
asks
Hi there would this glaze be suitable to coat ceramics made from your Earthenware paper clay and then painted with Amaco underglazes bisque fired and then refired to cone 5-6 temperatures ? Thank you
|
Réponses de Scarva:
|
Yes this would work.
|
Sultan
de
United Kingdom
asks
Which sieve in the scarva stock would be good for this? Never mixed a glaze before so not really sure which one to go for.
|
Réponses de Scarva:
|
100 mesh is ideal for all glazes.
|
Emma
de
United Kingdom
asks
Hi, just bought some.How many dips should I do as a dipping glaze and how many layers as a brush on? Id like to try firing lower than 1250 as my underglazes always looks a bit overcooked.However Id like to avoid cloudy clear glaze.
Many Thanks, Emma
|
Réponses de Scarva:
|
Hi,
With transparent glazes thinner is better. For dipping one dip of a suitably hydrated glaze is enough, for brush on 1-2 coats will work best.
Hope this helps!
|
Katie
de
United Kingdom
asks
What is the recommended SG please?
|
Réponses de Scarva:
|
Sorry we do not currently have this information for our glazes.
|
Nikki
de
Northern Ireland
asks
Hi I bought this as a brush on glaze, and it’s very good, but mine has started to get a bit ‘thick’ as I move down through the bottle. What can I use to thin it please? I wasn’t sure about just adding water? Thank you.
|
Réponses de Scarva:
|
Yes you can thin with a little water, hope this helps.
|
Ditte
de
United Kingdom
asks
My biggest European customer needs to know what my glazes contain to sell my ceramics in their European shops.
Is it possible to get a Safety Data Sheet and Technical Data Sheet that states what metals this glaze contains and in what amounts?
|
Réponses de Scarva:
|
Yes this is possible please email me the items you would like and I can arrange it for you. You can reach me at brendan@scarva.com
|
Sharon
de
Australia
asks
Is this glaze suitable for use on midfire porcelain?
|
Réponses de Scarva:
|
Yes it should work on this clay body.
|
Ashley
de
United Kingdom
asks
Hi, I want to fire this to 1187, will it still perform well at this temperature? I'm hoping it will be okay as it's only 13 degrees off the recommended temp but wanted to check first. Thanks!
|
Réponses de Scarva:
|
It is not ideal but you should get away with it with enough work heat, hope this helps.
|
Katie
de
United Kingdom
asks
Hi, is this transparent glaze dishwasher safe? Thank you!
|
Réponses de Scarva:
|
Here is a link that may help you:
https://www.scarva.com/en/Is-This-Glaze-Food-Safe/cc-40.aspx
|
Fern
de
United Kingdom
asks
Are you able to add anything to this to make it speckled?
|
Réponses de Scarva:
|
Yes you can add a very small amount of iron spangles here is a link:
https://www.scarva.com/en/Scarva-Raw-Materials-Iron-Oxide-Spangles-RM1310/m-169.aspx
|
Sue
de
United Kingdom
asks
Hi, I need to make a small amount of brush on glaze to cover a fiddly decoration. Can I just add your gum/ glaze medium to this glaze, either the raw powder or it already made into a dipping glaze.
|
Réponses de Scarva:
|
Yes you can add our glaze medium to a powdered glaze and pass through a fine mesh sieve to create a brushable glaze.
|
Sally White
de
United Kingdom
asks
Hi, I'm ordering some brush on transparent glaze and wondering what is the best type of brush to use with it for larger items
|
Réponses de Scarva:
|
I have found this brush to be excellent for glaze application:
https://www.scarva.com/en/Royal-and-Langnickel-Glaze-Wash-Natural-Hair---Series-R700---Size-1/m-1469.aspx
|
Laura
de
United Kingdom
asks
Hello, can you tell me if this product would work on earthenware casting slip and fired to 1100, please?
Many thanks!
|
Réponses de Scarva:
|
Hi, in short, no - this is a stoneware glaze. Our GZ2108 would be a better option for you. Hope this helps!
|
Phoebe
de
United Kingdom
asks
Is this glaze likely to craze on earthstone professional pf520 ashraf hanna raku body, fired to 1222 C? Where can I find the COE of glazes to work this out?
|
Réponses de Scarva:
|
Yes this glaze will craze on the PF520 due to its high grog content. Here is a link to a transparent that is suitable for this clay body:
https://www.scarva.com/en/Scarva-GZ2162-Super-Low-Expansion-Transparent/m-6640.aspx
|
lou
de
United Kingdom
asks
Would this be suitable for use on porcelain paper clay?Thanks
|
Réponses de Scarva:
|
Yes this glaze works well on stoneware or porcelain clay bodies.
|
Alycha
de
United Kingdom
asks
Hi, I’m brand new to pottery and purchased this glaze in power form. I think it would be more cost effective and easier for me to brush on this glaze to begin with. Is the “500ml brush on” pre-made and ready to use or will I still have to mix it with water? If yes, will i need a 100 mesh sieve to do so? Thank you
|
Réponses de Scarva:
|
Hi, any brush-on glaze is ready to use from the container. Should you wish to turn the powder glaze you have into a brush on glaze you can order our RM1072 Glaze Medium. This will need to be mixed with the powder and passed through a 100 mesh sieve.
Hope this helps!
|
Alex
de
United Kingdom
asks
Hi, will this glaze work on ES90? Or will it encounter any issues? Thanks
|
Réponses de Scarva:
|
Hi, GZ2150 is a great glaze for ES90. We recommend firing between 1220-1260.
Hope this helps.
|
Fiona
de
United Kingdom
asks
I use chrysanthos HF underglazes but cannot get hold of their transparent glaze which fits really well. I have tried another brand but not happy with the finish. Would this be a good fit, firing between 1222-1235°c. Thank you
|
Réponses de Scarva:
|
Hi there,
For this we would actually recommend GZ2136 as it is slightly softer.
Hope this helps.
|
Anna
de
United Kingdom
asks
Can I apply this glaze on greenware and do a single firing?
|
Réponses de Scarva:
|
We would not recommend applying any glaze to greenware for single firing for the best results it is important to bisque fire the vessel first.
|
Zac
de
United Kingdom
asks
Hi there, does this glaze contain alumina?
|
Réponses de Scarva:
|
Hi, yes it does.
|
Sharon
de
United Kingdom
asks
I have bought this glaze but I need a little help. Can you tell me what proportion of water to glaze powder I should use for a brush on glaze texture and if I need any other additives? Also, can you tell me the proportion of water to powder for your batt wash too? Thanks.
|
Réponses de Scarva:
|
To make a brush-on glaze mix 1000grams of glaze powder to 700mls of RM1072 Glaze Brush-on medium. Then pass through a sieve this will make a thick glaze which is only suitable for brushing on and not for dipping.
When mixing a glaze for dipping mix 1000grams of glaze powder to 700mls of water, then pass trough a sieve. This will make a glaze suitable for dipping only and not for brushing the reason why is because the glaze brush on medium slows the glaze drying giving an even coat and leaves no brush strokes where as a dipping glaze would dry to fast leaving an uneven and bumpy surface. Each of these recipes may need a little adjustment depending on the glaze used but as a rule of thumb for a dipping glaze you are after the consistency of single cream.
Batt wash is around 500-600mls of water to 1000grams of powder but does not need to be passed through a sieve. The best method to apply batt wash is in thin layers applied in opposite directions, leaving to dry in between coats this may be very slow drying as the kiln shelf is non-porous so you want to plan to do it over a few days.
|
Helen
de
United Kingdom
asks
Can I put some decoration, using brush on glaze which fires at a lower temperature, with this transparent glaze on top?
|
Réponses de Scarva:
|
You can however it is difficult to know what the result will be. The low temperature glaze will melt alot at the higher temperature so it may bubble or graze badly. I would advise testing before on a tile or ideally in the inside of a bowl this way if the glaze does run badly it will not ruin your kiln shelves.
|
