Mary
de
United Kingdom
asks
I want to make a sculpture around 20" high. with outstretched arms supporting a figure of a small child. I will support the child figure through building and firing with clay supports, but wonder if wire through the arm into the child figure would give extra strength, or is it unnecessary.
|
Réponses de Scarva:
|
Yes the wire would help however it would be important not to make the clay around the wire to thin, obviously the clay shrinks but the wire does not so if it was to thin you may experience cracking, I would recommend using the 16swg wire for finer detail and the 12swg for an armature, hope this helps.
|
Mary G
de
United Kingdom
asks
I'm making flowers with a head dia. of 6 inch, and want to use the wire for the stem. Would the wire be sufficiently strong enough to support the flower head once I have wrapped it with clay.
|
Réponses de Scarva:
|
Yes this thickness of wire is ideal for this purpose, hope this helps.
|
Ruth
de
United Kingdom
asks
Can I use this wire on a bead frame?
|
Réponses de Scarva:
|
You can however you need to be careful not to put to much weight on it as it may bend during firing.
|
karen
de
United Kingdom
asks
Is this wire suitable for pinning elements in place?
|
Réponses de Scarva:
|
You could however it is very thick you would be best using the 16swg wire which you can then easily twist into a u shape.
|
John
de
United Kingdom
asks
what temp will this wire go to ??
|
Réponses de Scarva:
|
This wire will go up to 1300°C.
|
High temperature armature wire may be incorporated into the actual structure to support your sculpture at the making stage. This wire is suitable for firing.
