Sean
de
United Kingdom
asks
Does CS30 come premixed and ready to pour into plaster molds or is it a powder that will require water and deflocculants?
|
Réponses de Scarva:
|
This is ready mixed, simply shake well, open and pour.
|
Megan
de
United Kingdom
asks
what is the shrinkage rate on this porcelain casting slip?
|
Réponses de Scarva:
|
Approximately 15%.
|
Rosella
de
Malta
asks
Can you single fire CS30 to mature temp 1240degC in a single firing? What would the schedule need to be in degC/time please? Thanks.
|
Réponses de Scarva:
|
Yes this is possible I would fire 60oC per hour to 300oC, then 100oC to 1235oC with a 30 minute soak, end.
|
Nausika
de
Belgium
asks
Hello, I would like to cast seed pods and other dried flowers in porcelain, would this be the best casting slip to use? Or would you recommend another product?
|
Réponses de Scarva:
|
Yes this is ideal for this technique.
|
Vero
de
United Kingdom
asks
Hello,
I would like to see If this slip can be use also as decorating slip?
Thank you
|
Réponses de Scarva:
|
Hi,
I would suggest using the Scarva Nano Porcelain Decorating Slips, casting slip will not really work in this way.
Hope this helps
|
Katarzyna
de
Poland
asks
Hello, I'm searching for pure porcelain, without black spots after firing, caused by iron particles. Is your porcelain slip iron free?
|
Réponses de Scarva:
|
Hi, while the manufacturing process can't guarantee there will be no defects in the casting slip in the thousands of tests we have done here we have never seen black spots appear in this casting slip. Hope this helps!
|
Dave
de
United Kingdom
asks
What do you recommend to produce handles to attach to this casting slip ?
|
Réponses de Scarva:
|
Here is a link to the plastic clay body:
https://www.scarva.com/en/Scarva-P130-P2-Casting-Porcelain/m-61.aspx
|
Samantha
de
United Kingdom
asks
Hi I bought the scarva Porcelain slip and used with the Nano slip, Its beautiful to work with. What clear/Transparent glaze would you recommend for this for the glaze firing. Many Thanks Sam
|
Réponses de Scarva:
|
I would recommend our GZ2305, here is a link:
https://www.scarva.com/en/Scarva-GZ2305-Zinc-Free-Porcelain-Transparent/m-249.aspx
|
Debbie
de
United Kingdom
asks
Hello,
Can I add water to dilute the slip if it has thickened over time?
|
Réponses de Scarva:
|
Yes you can dilute with a little water or a small drop of dispex or sodium silicate will improve the consistency as well.
|
Trish
de
United Kingdom
asks
What bisque temperature would you reccomend for your CS30 porcelain slip? I intend to apply a high temperature firing glaze.
|
Réponses de Scarva:
|
We recommend bisque firing to 1000°C
|
Anna
de
United Kingdom
asks
Hello,
what is the pint weight of this slip?
|
Réponses de Scarva:
|
Approximately 700 - 750grams.
|
