Margaret
de
United Kingdom
asks
Can I use this successfully on stoneware over a clear stoneware glaze?
|
Réponses de Scarva:
|
Hi,
Not really, you will find it very difficult to get the glaze to adhere to the already glazed ware. Doing a high bisque firing to a point where the body is still slightly porous and glazing with 5116 fired to earthenware is your best bet.
Hope this helps!
|
Ana
de
United Kingdom
asks
Is this glaze food safe?
Thanks,
Ana
|
Réponses de Scarva:
|
Hi, we would suggest you avoid earthenware metallic glazes for dinnerware
|
Marina
de
Malta (NO shipping to Malta)
asks
What is meant by 30 minute soak please? Do you actually soak your clay body for 40 minutes before glazing?
Thanks!
|
Réponses de Scarva:
|
Hi, a soak is a term used in ceramics for holding at a particular temperature for a duration of time. In this example the firing program would be held at 1040°C for 30 minutes. Hope this helps
|
alice mcilroy
de
United Kingdom
asks
Hi,
I just asked a question about the metallic scultural glazes and then found this. Which one would be best for school use (earthenware)?
Also, can I dip clear glaze over the top of any of them and still keep the gold effect?
Many thanks.
|
Réponses de Scarva:
|
I would recommend using 5116 Metallic Gold or 9541 Glossy Gold. They come ready to use from the jar and are used widely in schools and colleges. For the best results I would not apply a transparent on top as it could get quite messy simply stir the glaze well then apply 2-3 coats on your piece.
|
Terracolor Powder Earthenware Glazes are a more cost effective and faster approach to glazing a larger volume of pots. Simply mix the powder with water and pass through a sieve to create a dipping glaze. It is important to note that especially on speckled glazes the residue left in the sieve should be returned to the glaze as this is what creates the speckled effect.
