There are 5 reviews with an average rating of
4.80
This is a beautiful opaque glaze, very much as depicted in the sample shown.
Requires a longish soak at 1040c to produce the subtle mottling.I found that
two generous coats is sufficient for good coverage.Benefits from a good stir
between applications.
I bought a few terracour green glazes to test for Xmas trees and was hoping they would all break as described on the photo. This one is probably the most representative of the ones I selected but non of them came up with that beautiful finish on KGM clay fired at cone 04
Terracolor Brush-On Earthenware Glazes are available ready to use straight from the jar, simply stir well then apply three coats to your bisque pieces. Glaze will dry quickly allowing you to move them to the kiln for firing. For best results fire 1040°C with a 30 minute soak on a computerised controller.
