Pottery Crafts Comet P59240 60Ltr From  £1736.41


The Potterycrafts Comet is ideal for domestic situations and professional studios working on a small scale. This price includes the single programmable controller TC3300-1 and standard furniture set.

 

Key Features


Kiln walls 63.5mm insulation brick plus 19mm backup insulation. 
Stainless steel outer jacket 
Kiln lid 65mm insulation brick. 
Kanthal A1 elements. 
Fitted with 76mm castors for ease of movement. 
Lid vent hole allows venting / cooling of the kiln during the firing process. 
Side vent with chimney that can be ducted to atmosphere if required. 
Captive interlock safety switch. 
Dual contactors provide protection against over fires, when used with Potterycrafts Kiln controllers.

 

P59240 SPECIFICATIONS


Firing Capacity: 60 litres (2.1 cu/ft). 
Maximum Temperature: 1300°C (Cone 10) 
Chamber Dimensions: 400mm wide x 446mm deep
External Dimensions: 560mm wide x 710mm deep x 750mm high
Weight: 58kgs 
Power: 5.5 kW 
Supply Required Single Phase (Amps): 32Amps 
Supply Required 3 Phase (Amps): N/A 


Controller included: TC3300-1, (1-program memory each with 2 segments) 
You can upgrade to CERA-2CERA-5 , CERA-10 or CERA-10+ for marginal extra cost.

 

Furniture Set (included):

4 - P5481/1 350x10mm CIRCULAR BATT 
9 - P5518 50mm PROPS
6 - P5519 100 mm PROP
1 - P3380.5 (0.5Kg) BATT WASH

 

Kiln is made to order, delivery approx 4-6 weeks (confirmed when ordering)



1 - Extra Furniture Set for P59240
CHOOSE OPTION
Quantity
Pottery Crafts Extra Furniture Set for P59240
4 - P5481/1 350x10mm CIRCULAR BATT 
9 - P5518 50mm PROPS
6 - P5519 100 mm PROP
1 - P3380.5 (0.5Kg) BATT WASH
Pottery Crafts Without Extra Furniture Set

Without Extra Furniture Set

 

Kiln as standard with 1 Furniture Set 

2 - CERA-2 Controller for P59240
CHOOSE OPTION
Pottery Crafts CERA-2 Controller for P59240

CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.

 

CERA-2 has 2programs each with delay start, 3 heating/cooling ramps, soak, cut off and program pause.

 

This is a straight forward controller for pottery firing where usually two programs are used, having three ramps allows for a warming or a cooling phase in the program.

Pottery Crafts Without CERA-2 Controller
Kiln with Standard TC3300-1 controller
3 - CERA-5 Controller for P59240
CHOOSE OPTION
Pottery Crafts CERA-5 Controller for P59240

CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.

 

CERA-5+ has 5 programs each with delay start, 5 heating/cooling ramps, soak, cut off and program pause.

 

This controller gives the benefit multiple heating and cooling ramps for pottery firing where usually two programs are used, having five ramps allows for several heating and/or cooling phases in the program.

Pottery Crafts Without CERA-5 Controller
Without CERA-5 controller, kiln as standard with TC3300-1 controller
4 - CERA-10 Controller for P59240
CHOOSE OPTION
Pottery Crafts CERA-10 Controller for P59240

CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.

 

CERA-10 has 10 programs each with 10 segments. Delay start and program pause. Each segment has a heating/cooling ramp, a target temperature and a soak. This controller is ideal for firings where a range of programs are frequently used.

It can be used for any firing requiring close control over multiple heating and cooling ramps such as macro crystalglazes and for glass slumping and fusing.

Pottery Crafts Without CERA-10 Controller
Without CERA-10 Controller, kiln as standard with TC3300-1 controller
5 - CERA-10+ Controller for P59240
CHOOSE OPTION
Pottery Crafts CERA-10+ Controller for P59240

CERAcontrol is the latest development in a long series of controllers, they incorporate new software giving improved efficiency and ease of programming together with up to date safety and diagnostic features.

 

CERA-10 has 10 programs each with 10 segments. Delay start and program pause. Each segment has a heating/cooling ramp, a target temperature and a soak. This controller is ideal for firings where a range of programs are frequently used.

It can be used for any firing requiring close control over multiple heating and cooling ramps such as macro crystalglazes and for glass slumping and fusing.

Pottery Crafts Without CERA-10 + Controller
Without CERA-10 + Controller, kiln as standard with TC3300-1