|Page principaleSpectrum High Fire Cone 4/6 GlazesSpectrum 1121 Satin White||
Spectrum 1121 Satin White £13.79
1121 Satin White
Spectrum High Fire Glazes are a range of bright and reactive colours. The glazes are ready to use straight from the jar, simply stir well then apply three coats to your bisque pieces. Glaze will dry quickly allowing you to move them to the kiln for firing. For best results fire 1200°C with a 30 minute soak on a computerised controller.
Spectrum High Fire Glazes are Lead Free.
There are 4 reviews with an average rating of 4.75
Anna de United KingdomPropriétaire06 February 2015 12:45
I have been using this glaze for some time and now order it by the gallon rather than the pint. It is a very tactile smooth satin-matte finish which gets lots of comments from my customers. I use this glaze on a pure smooth white body and there are no speckles in the glaze finish. The body I use is a refined earthenware that happily goes up to stoneware temperatures. I had been worried that this glaze, being designed for stoneware bodies, would not 'fit', but i have not had any problems. Designed as a brush-on glaze i successfully use it slightly watered down as a dipping glaze. (The bisque temp that works best for me is about 1080 to keep the ware porous enough to overcome the brush-on additives that delay absorption.) I fire this glaze to cone 3/4 which is a lower temperature than recommended. It looks fully mature at this temperature. Firing at the recommended temperature presents problems with cratering for me, but i think this is a problem caused by the clay body i use rather than the glaze. I would recommend this glaze.
Jude de United KingdomPropriétaire29 May 2015 19:53
Stays nice and smooth when brushed on and has a gorgeous appearance. I use it on Scarva porcelain paper clay at 1220°C. Be careful though, it does have a shelf life and after a year or so of careful storage, pitting appeared on my work when fired (I did several tests).
Seen a lower price elsewhere? We will do our best to match any price request, simply click the button below or give our sales team a call on 028 4066 9699 and we'll check it out for you