Sean
desde
United Kingdom
asks
Does CS30 come premixed and ready to pour into plaster molds or is it a powder that will require water and deflocculants?
|
Respuestas de Scarva:
|
This is ready mixed, simply shake well, open and pour.
|
Megan
desde
United Kingdom
asks
what is the shrinkage rate on this porcelain casting slip?
|
Respuestas de Scarva:
|
Approximately 15%.
|
Rosella
desde
Malta
asks
Can you single fire CS30 to mature temp 1240degC in a single firing? What would the schedule need to be in degC/time please? Thanks.
|
Respuestas de Scarva:
|
Yes this is possible I would fire 60oC per hour to 300oC, then 100oC to 1235oC with a 30 minute soak, end.
|
Nausika
desde
Belgium
asks
Hello, I would like to cast seed pods and other dried flowers in porcelain, would this be the best casting slip to use? Or would you recommend another product?
|
Respuestas de Scarva:
|
Yes this is ideal for this technique.
|
Vero
desde
United Kingdom
asks
Hello,
I would like to see If this slip can be use also as decorating slip?
Thank you
|
Respuestas de Scarva:
|
Hi,
I would suggest using the Scarva Nano Porcelain Decorating Slips, casting slip will not really work in this way.
Hope this helps
|
Katarzyna
desde
Poland
asks
Hello, I'm searching for pure porcelain, without black spots after firing, caused by iron particles. Is your porcelain slip iron free?
|
Respuestas de Scarva:
|
Hi, while the manufacturing process can't guarantee there will be no defects in the casting slip in the thousands of tests we have done here we have never seen black spots appear in this casting slip. Hope this helps!
|
Dave
desde
United Kingdom
asks
What do you recommend to produce handles to attach to this casting slip ?
|
Respuestas de Scarva:
|
Here is a link to the plastic clay body:
https://www.scarva.com/en/Scarva-P130-P2-Casting-Porcelain/m-61.aspx
|
Samantha
desde
United Kingdom
asks
Hi I bought the scarva Porcelain slip and used with the Nano slip, Its beautiful to work with. What clear/Transparent glaze would you recommend for this for the glaze firing. Many Thanks Sam
|
Respuestas de Scarva:
|
I would recommend our GZ2305, here is a link:
https://www.scarva.com/en/Scarva-GZ2305-Zinc-Free-Porcelain-Transparent/m-249.aspx
|
Debbie
desde
United Kingdom
asks
Hello,
Can I add water to dilute the slip if it has thickened over time?
|
Respuestas de Scarva:
|
Yes you can dilute with a little water or a small drop of dispex or sodium silicate will improve the consistency as well.
|
Trish
desde
United Kingdom
asks
What bisque temperature would you reccomend for your CS30 porcelain slip? I intend to apply a high temperature firing glaze.
|
Respuestas de Scarva:
|
We recommend bisque firing to 1000°C
|
Anna
desde
United Kingdom
asks
Hello,
what is the pint weight of this slip?
|
Respuestas de Scarva:
|
Approximately 700 - 750grams.
|
Firing Temp 1220°C-1280°C
